From 44da246fa5e373c86373889b53263f52af84d525 Mon Sep 17 00:00:00 2001 From: Bill Date: Sat, 31 Dec 2022 14:23:20 -0500 Subject: Major overhaul, markdowns + copyright notice --- www/wc3.html | 156 ----------------------------------------------------------- 1 file changed, 156 deletions(-) delete mode 100644 www/wc3.html (limited to 'www/wc3.html') diff --git a/www/wc3.html b/www/wc3.html deleted file mode 100644 index 2e01c97..0000000 --- a/www/wc3.html +++ /dev/null @@ -1,156 +0,0 @@ - - - - - - - - Senders' Wishlist - - - -

Warcraft 3 Setup Guide

Game Setup

Downloading the game

Download the wc3.zip. You can download it from https://cdn.senders.io/blobs/wc3.zip -

Extract the game contents

Unzip the game contents. If you - can't unzip it you can download 7Zip from: https://www.7-zip.org/. -

- Hover to Zoom -

- Hover to Zoom -

Launch the game

Open the folder you unzipped into and - open Warcarft III 1.31.1\x86_64\Warcraft III.exe. - This will launch the game. -

- Hover to Zoom -

Active your CD Key

The game will prompt with a launcher - for battle.net or CD Key. Choose CD Key and type in the provided CD Key. Your - CD Key can be found in CDKEYS.jpg back in the - main folder. -

- Hover to Zoom -

Warning! Do Not Update

Once you launch the game it will prompt you to - update: DO NOT UPDATE THE GAME . After clicking No it may - ask you again on launch again (sometimes). Just keep clicking NO. -

Done!

Now you've setup Warcraft 3. Next you need - to setup a virtual LAN -

Setting up a Virtual Lan

In this section I'll show - a guide for setting up ZeroTier. -

Before you continue

Only one person - needs to setup a network. Everyon else can join an existing - network through the network's creator (admin). And once - you've been authorized by the admin you can join/unjoin as you please. - The admin doesn't even need to be in the same game / online. -

Admin | Network Setup

If you want to be the network admin you can - create a network by first creating an account with ZeroTier. You'll need - to supply a verifiable email but that is it. Here is a quick summary of how - to setup. A full guide can be found at - Zero Tiers own setup guide -

- Hover to Zoom -

Your Network ID

Your network ID will be present on the network page. - The example netowrk here is: 17d709436c634b2b. - You will share this with the members. -

Admin | Network Settings

You shouldn't have to do anything - custom, just authorize the users who join your network. This can be done by - either adding them directly, or checking the authorize box. You can add them - from the settings menu at the bottom: -

- Hover to Zoom -

Member | Download

Note Admins must also join their own - network! Member's first must download the application: Zero Tier 1. -

Member | ZeroTier UI

The ZeroTier UI is just a system-tray icon. Just - right click to perfom any of the actions listed below. (It's the icon - that shares the icon from the website!) -

- Hover to Zoom -

- Hover to Zoom -

You can right click the tray-icon to open the menu. Here you will see - your Node Id. Example: Node ID: 2d213b67f2 -

Member | Add network

To join simply paste the network ID in the form. - You can get the ID from the Network Admin. -

- Hover to Zoom -

Admin | Authorize the Member

The Admin will then need your - Node ID and will authorize you in their network settings. -

- Hover to Zoom -

Member | Reboot

Now that you've connected and setup I recommend - rebooting here. You can also reboot upon installation too to be safe. -

Member | Verify connectivity

You can open the menu and click - "Show Network" which will show you your connected networks. You - should see Status: OK. You can click the connect - checkbox here to connect/disconnect. Or click the network from the menu - directly. -

- Hover to Zoom -

Admin | Verify everyone is - connected

You can verify the connected - nodes by looking at the network view under Members. You should see Last Seen - "ONLINE" and their Physical IP - this will mean they're - connected successfully. You can add names and descriptions to help manage who - is who in case someone loses connectivity. -

Creating a LAN Game

At this point you should be able to create a LAN game. It will - ask you to install Bonjour services. Click yes. The game may hang for a bit - while this happens, that is normal. Authorize the network firewall popup if - it does. -

Troubleshooting

The network Admin can troubleshoot any connectivity issues by - checking if the Member's are present in their network settings. -

Status: - Request_Configuration

If you are stuck - in this status you can delete the network. Reboot. Then re-add the network - and have the admin re-authorize you if necessary. This may take a few minutes - before you're IP appears in the network settings for the admin. - - -- cgit v1.2.3-54-g00ecf