From 7726e085be032884b855ae20f45a316460f93ec8 Mon Sep 17 00:00:00 2001 From: Bill Date: Fri, 6 Jan 2023 21:31:24 -0500 Subject: Published new blogs, RSS, and Music Blog! --- www/blog/music/2023-01-06/index.html | 112 +++++++++++++++++++++++++++++++++++ 1 file changed, 112 insertions(+) create mode 100644 www/blog/music/2023-01-06/index.html (limited to 'www/blog/music/2023-01-06/index.html') diff --git a/www/blog/music/2023-01-06/index.html b/www/blog/music/2023-01-06/index.html new file mode 100644 index 0000000..c539a73 --- /dev/null +++ b/www/blog/music/2023-01-06/index.html @@ -0,0 +1,112 @@ + + + + + + senders.io - PAGE_TITLE + + + + + +
+
+

Music Blog?!

+

I wanted to make a little blog section to just talk about my music + making. Mainly, to save my friends from enduring my thinking out + loud.

+

Reworking my THR100HD

+

I have a Yamaha THR100H Dual which is a nice modeling amp + with two "amps". Typically, I run these in parallel so I am + running through BOTH at the same time. As of late I am actually + considering moving to dialing in separate tones, and using my Joyo PXL-Live to act as a "channel" + switcher.

+

Dual Amping

+

Honestly, dual amping is my favorite thing. And I would hate + to give it up, as it gives my tones SO much depth. But I find when I try + to mix my guitars that extra depth just makes mixing a bit more of a + hassle than need be. But Mick of "That Pedal Show" on YouTube I + feel feels similarly, considering in one of their "use less" challenge videos + he used two amps for maximum tone shaping - which I feel adds some + justification to my efforts!

+

Results after one night

+

I spent an hour or so tonight messing around with my setup and came + out with the following high gain tone:

+
+
+ "Rezzed" - Hi-gain dual amped Baritone guitar +
+
+ No copyright +
+
+

Thoughts

+

I feel its a bit... boomy still. There is some extra weight coming + from the "clean" channel that I think is causing this to lose + some clarity. I don't think if I wanted to add a mix around this + I'd even end up keeping it. Or I would do some heavy EQing to that + channel. Here is what I have dialed in so far:

+
+ + +
+ Current dual amp settings +
+
+

Future

+

In the future I plan to setup different profiles between each the 5 + channels per amp - so they're all useable and I can just do single + amping - as that provides me the FX loop until I setup a proper stereo + board. But until then - this is the setup I've been using and I + rarely touch the back!

+
+ + +
+ + -- cgit v1.2.3-54-g00ecf