summaryrefslogtreecommitdiff
path: root/www/blog/feed.rss
diff options
context:
space:
mode:
Diffstat (limited to 'www/blog/feed.rss')
-rw-r--r--www/blog/feed.rss2527
1 files changed, 0 insertions, 2527 deletions
diff --git a/www/blog/feed.rss b/www/blog/feed.rss
deleted file mode 100644
index a36438f..0000000
--- a/www/blog/feed.rss
+++ /dev/null
@@ -1,2527 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<rss version="2.0">
-<channel>
- <title>senders.io - Blog</title>
- <description>senders.io's blog feed</description>
- <link>https://www.senders.io/</link>
- <copyright>2023 senders dot io - CC BY-SA 4.0</copyright>
- <language>en-US</language>
- <ttl>60</ttl>
- <lastBuildDate>Sat, 18 Mar 2023 23:12:23 -0400</lastBuildDate>
- <pubDate>Sat, 18 Mar 2023 23:12:23 -0400</pubDate>
- <item>
- <title>Music: A Tour de Chorus</title>
- <link>https://www.senders.io/blog/music/2023-03-18/</link>
- <guid isPermaLink="true">https://www.senders.io/blog/music/2023-03-18/index.html</guid>
- <pubDate>Sat, 18 Mar 2023 23:12:23 -0400</pubDate>
- <description>
- <![CDATA[
- <article>
- <h1>A Tour de Chorus</h1>
- <p>I&#39;ve been talking a lot about chorus on my mastodon, like, A LOT.
- So I thought it would be fun to explore my chorus pedals a bit and
- present this information in some shareable way, since no one wants to
- listen to 18 minutes of audio in a row.</p>
- <h2>What&#39;s on display</h2>
- <p>So I have three chorus pedals to show off today:</p>
- <ul>
- <li>Boss CE-20</li>
- <li>Warlus Audio Julia</li>
- <li>Multivox CB-1 Chorus Box</li>
- </ul>
- <h2>The other gear</h2>
- <p>I will be playing each of these pedals through my THR-100HD (see
- <a href="/blog/music/2023-01-06/"
- rel="me noopener"
- target="_blank">my previous music blog post</a> in which I deep dive a
- bit into this amp). It&#39;s running on the crunch channel, just at
- the edge of breakup, with little to no reverb.</p>
- <p>As for guitar. I am using my Reverend Descent RA Baritone</p>
- <h2>The demos</h2>
- <p>For each of these demos I will be playing the same loop (mostly). I
- recorded a loop into my Boss RC-3 to remove any playing bias towards the
- more warbely chorus tones, and to make it easier for me! Each demo is
- about 48s long (depending on how good my trimming was). I added a bit of
- EQ in post to cut out some digital hum introduced when pairing my CE-20
- with my RC-3 so sorry about that...</p>
- <p>Let&#39;s start with the clean tone:</p>
- <figure>
- <audio controls=""><source src="/blog/music/2023-03-18/audio/clean.mp3">
- <p>Download <a href="/blog/music/2023-03-18/audio/clean.mp3"
- rel="me noopner"
- target="_blank">MP3</a></p></audio>
- </figure>This loop is something I had been noodling on all week, while on
- my chorus kick. I feel it&#39;s actually a decent demo because it calls
- on a lot of classic chorus sounds. Individually picked notes, bright open
- strings, and then at the end some Nirvana-like dark power chord picking.
- All classic chorus sounds to me.
- <h3>CE-20</h3>
- <p>Next we can go through the CE-20. The CE-20 has 4 modes we&#39;ll be
- demoing, but there are a total of 6. We are demoing the &quot;Rich&quot;,
- &quot;Standard&quot;, &quot;Dimensional D&quot;, and &quot;CE-1&quot;
- settings. I skipped the &quot;Acoustic&quot; and &quot;Bass&quot;
- settings as they&#39;ve always felt like some slight EQ on the
- &quot;standard&quot; mode.</p>
- <h4>Standard</h4>
- <p>We can start with &quot;Standard&quot; as it&#39;s the most &quot;boss
- chorus&quot;. Though I personally feel it lacks a bit of the bite the
- CE-1 and CE-2 offer. But it wouldn&#39;t surprise me if
- &quot;Standard&quot; was just a CE-2.</p>
- <figure>
- <figcaption>
- CE-20 Standard Mode - Rate 10 o&#39;clock, Depth 2 o&#39;clock
- </figcaption><audio controls=""><source src=
- "/blog/music/2023-03-18/audio/ce-20-standard-r10-d2.mp3">
- <p>Download <a href="/blog/music/2023-03-18/audio/ce-20-standard-r10-d2.mp3"
- rel="me noopner"
- target="_blank">MP3</a></p></audio>
- </figure>
- <figure>
- <figcaption>
- CE-20 Standard Mode - Rate 2 o&#39;clock, Depth 10 o&#39;clock
- </figcaption><audio controls=""><source src=
- "/blog/music/2023-03-18/audio/ce-20-standard-r2-d10.mp3">
- <p>Download <a href="/blog/music/2023-03-18/audio/ce-20-standard-r2-d10.mp3"
- rel="me noopner"
- target="_blank">MP3</a></p></audio>
- </figure>
- <h4>Rich</h4>
- <p>Let&#39;s compare this with the &quot;Rich&quot; mode. And keep in
- mind the only settings I will be changing between these CE-20 modes is
- the rate and depth. There is actually quite a bit of tone controlling you
- get in the CE-20. But I generally keep those fairly static based on my
- guitar and amp settings, and for the purposes of these demos are
- static.</p>
- <figure>
- <figcaption>
- CE-20 Rich Mode - Rate 10 o&#39;clock, Depth 2 o&#39;clock
- </figcaption><audio controls=""><source src=
- "/blog/music/2023-03-18/audio/ce-20-rich-r10-d2.mp3">
- <p>Download <a href="/blog/music/2023-03-18/audio/ce-20-rich-r10-d2.mp3"
- rel="me noopner"
- target="_blank">MP3</a></p></audio>
- </figure>
- <h4>Dimensional D</h4>
- <p>This mode is a recreation of the SDD-320 Dimension D effects unit,
- later made into the Boss DC-2. This effect is one of my favorite
- choruses. It&#39;s so unique. On the CE-20 there are 7 modes: 1 - 4, as
- well as 3 &quot;combo&quot; modes: 1+4, 2+4, and 3+4. These map directly
- to their SDD-320 counterparts, which also let you stack the modes
- together. This really shines in stereo, but since the Julia is mono, I
- felt it&#39;s only fair to use these how I use them on my board.</p>
- <figure>
- <figcaption>
- CE-20 Dimensional D Mode - Mode 3
- </figcaption><audio controls=""><source src=
- "/blog/music/2023-03-18/audio/ce-20-dimensional-d-3.mp3">
- <p>Download <a href="/blog/music/2023-03-18/audio/ce-20-dimensional-d-3.mp3"
- rel="me noopner"
- target="_blank">MP3</a></p></audio>
- </figure>
- <figure>
- <figcaption>
- CE-20 Dimensional D Mode - Mode 4
- </figcaption><audio controls=""><source src=
- "/blog/music/2023-03-18/audio/ce-20-dimensional-d-4.mp3">
- <p>Download <a href="/blog/music/2023-03-18/audio/ce-20-dimensional-d-4.mp3"
- rel="me noopner"
- target="_blank">MP3</a></p></audio>
- </figure>
- <figure>
- <figcaption>
- CE-20 Dimensional D Mode - Mode 3+4
- </figcaption><audio controls=""><source src=
- "/blog/music/2023-03-18/audio/ce-20-dimensional-d-3-4.mp3">
- <p>Download <a href="/blog/music/2023-03-18/audio/ce-20-dimensional-d-3-4.mp3"
- rel="me noopner"
- target="_blank">MP3</a></p></audio>
- </figure>
- <p>These are always so cool to hear. When you get into the combo modes
- you start getting more &quot;chorus&quot; and less just
- &quot;width/movement&quot;. But these are interesting to listen to
- compared to the clean. There is subtle differences - but they&#39;re
- there! It&#39;s almost like it is now less stark and smoother. Like the
- notes are lathered in butter, mmm!</p>
- <h4>CE -1</h4>
- <p>Okay, now on to the real show, the CE-1. Not much to say about this
- one. It&#39;s a CE-1, you have an &quot;intensity&quot; knob, and
- it&#39;s so rich. The delay rate is much slower than you would expect,
- almost logarithmic. But when you get past noon it starts to get quite
- seasick.<br>
- <small><em>Editors note: 7 o&#39;clock may be a bit higher than 7. None
- of these pedals have freaking numbers on their knobs, so it&#39;s all a
- guess. But it&#39;s a bit up from off</em></small></p>
- <figure>
- <figcaption>
- CE-20 CE-1 Mode - Intensity 7 o&#39;clock
- </figcaption><audio controls=""><source src=
- "/blog/music/2023-03-18/audio/ce-20-ce-1-7oclock.mp3">
- <p>Download <a href="/blog/music/2023-03-18/audio/ce-20-ce-1-7oclock.mp3"
- rel="me noopner"
- target="_blank">MP3</a></p></audio>
- </figure>
- <figure>
- <figcaption>
- CE-20 CE-1 Mode - Intensity 10 o&#39;clock
- </figcaption><audio controls=""><source src=
- "/blog/music/2023-03-18/audio/ce-20-ce-1-10oclock.mp3">
- <p>Download <a href="/blog/music/2023-03-18/audio/ce-20-ce-1-10oclock.mp3"
- rel="me noopner"
- target="_blank">MP3</a></p></audio>
- </figure>
- <h3>Multivox CB-1 Chorus Box</h3>
- <p>The Multivox CB-1 Chorus Box is a CE-1 clone, according to the gear
- page, it&#39;s literally just the same circuit and components. I got my 5
- years ago because, well, I love chorus. Currently, a part of my rack unit
- to be used with my synths, this chorus is just so smooth. But the biggest
- trouble is dialing in the right level. You&#39;ll notice for the CB-1
- demos it&#39;s a different demo recording. I had to move my setup and I
- accidentally wiped the RC-3. But because the CB-1 can be a bit tricky to
- dial in, it&#39;s a bit quieter than the other demo tracks. But the level
- control is one of my favorites, as it can add some crunch to the tone on
- the peaks, adding a lot of flavor. I am running my guitar through the
- &quot;hi&quot; input, because it gives me a bit more play with the input
- level.</p>
- <h4>Chorus</h4>
- <figure>
- <figcaption>
- CB-1 Chorus Mode - Intensity 7 o&#39;clock
- </figcaption><audio controls=""><source src="/blog/music/2023-03-18/audio/cb-1-7oclock.mp3">
- <p>Download <a href="/blog/music/2023-03-18/audio/cb-1-7oclock.mp3"
- rel="me noopner"
- target="_blank">MP3</a></p></audio>
- </figure>
- <figure>
- <figcaption>
- CB-1 Chorus Mode - Intensity 10 o&#39;clock
- </figcaption><audio controls=""><source src=
- "/blog/music/2023-03-18/audio/cb-1-10oclock.mp3">
- <p>Download <a href="/blog/music/2023-03-18/audio/cb-1-10oclock.mp3"
- rel="me noopner"
- target="_blank">MP3</a></p></audio>
- </figure>
- <figure>
- <figcaption>
- CB-1 Chorus Mode - Intensity 2 o&#39;clock
- </figcaption><audio controls=""><source src="/blog/music/2023-03-18/audio/cb-1-2oclock.mp3">
- <p>Download <a href="/blog/music/2023-03-18/audio/cb-1-2oclock.mp3"
- rel="me noopner"
- target="_blank">MP3</a></p></audio>
- </figure>
- <h4>Vibrato</h4>
- <p>While this is mono, so it&#39;s acting like a straight vibrato. When
- playing in stereo this creates it&#39;s own chorus, the stereo outs are
- &quot;dry&quot; and &quot;wet&quot;. This differs from the CE-1 chorus
- too, so it&#39;s like 2 chorus pedals in one. These demos are in
- mono.</p>
- <figure>
- <figcaption>
- CB-1 Vibrato Mode - Rate 10 o&#39;clock, Depth 2 o&#39;clock
- </figcaption><audio controls=""><source src=
- "/blog/music/2023-03-18/audio/cb-1-vibrato-d2-r10.mp3">
- <p>Download <a href="/blog/music/2023-03-18/audio/cb-1-vibrato-d2-r10.mp3"
- rel="me noopner"
- target="_blank">MP3</a></p></audio>
- </figure>
- <figure>
- <figcaption>
- CB-1 Vibrato Mode - Rate 2 o&#39;clock, Depth 10 o&#39;clock
- </figcaption><audio controls=""><source src=
- "/blog/music/2023-03-18/audio/cb-1-vibrato-d10-r2.mp3">
- <p>Download <a href="/blog/music/2023-03-18/audio/cb-1-vibrato-d10-r2.mp3"
- rel="me noopner"
- target="_blank">MP3</a></p></audio>
- </figure>
- <h4>CB-1 Off with Level Boost</h4>
- <p>The CB-1 when over driven (just by the guitar itself) gets really warm
- crunch to signal, and it&#39;s a lot of fun. I usually run my Model D
- through this and I love it.</p>
- <figure>
- <figcaption>
- CB-1 Off - Level to a point where when I dig in it clips heavily
- </figcaption><audio controls=""><source src=
- "/blog/music/2023-03-18/audio/cb-1-off-with-level.mp3">
- <p>Download <a href="/blog/music/2023-03-18/audio/cb-1-off-with-level.mp3"
- rel="me noopner"
- target="_blank">MP3</a></p></audio>
- </figure>
- <h3>Walrus Audio Julia</h3>
- <p>I picked up the Julia because it&#39;s such a versatile chorus: giving
- you control over the rate, depth, lag, waveform, and mix. This lets you
- craft basically ANY chorus sound you want. Exploring sounds, I&#39;ve
- noticed the major limiter being the rate. The Julia is just SO fast. Even
- at min rate, it&#39;s still faster than like 1/3 of the Boss rates. But
- the sounds are still amazing!</p>
- <figure>
- <figcaption>
- Julia - Triangle Wave, Rate 7 o&#39;clock, Depth 2 o&#39;clock, Lag 3
- o&#39;clock, Mix 12 o&#39;clock (chorus)
- </figcaption><audio controls=""><source src=
- "/blog/music/2023-03-18/audio/julia-chorus-1.mp3">
- <p>Download <a href="/blog/music/2023-03-18/audio/julia-chorus-1.mp3"
- rel="me noopner"
- target="_blank">MP3</a></p></audio>
- </figure>
- <figure>
- <figcaption>
- Julia - Sine Wave, Rate 10 o&#39;clock, Depth 2 o&#39;clock, Lag 9
- o&#39;clock, Mix 12 o&#39;clock (chorus)
- </figcaption><audio controls=""><source src=
- "/blog/music/2023-03-18/audio/julia-chorus-2.mp3">
- <p>Download <a href="/blog/music/2023-03-18/audio/julia-chorus-2.mp3"
- rel="me noopner"
- target="_blank">MP3</a></p></audio>
- </figure>
- <figure>
- <figcaption>
- Julia - Sine Wave, Rate 9 o&#39;clock, Depth 3 o&#39;clock, Lag 9
- o&#39;clock, Mix 12 o&#39;clock (chorus)
- </figcaption><audio controls=""><source src=
- "/blog/music/2023-03-18/audio/julia-chorus-3.mp3">
- <p>Download <a href="/blog/music/2023-03-18/audio/julia-chorus-3.mp3"
- rel="me noopner"
- target="_blank">MP3</a></p></audio>
- </figure>
- <figure>
- <figcaption>
- Julia - Triangle Wave, Rate 8 o&#39;clock, Depth 12 o&#39;clock, Lag
- 12 o&#39;clock, Mix 5 o&#39;clock (vibrato, max)
- </figcaption><audio controls=""><source src=
- "/blog/music/2023-03-18/audio/julia-vibrato.mp3">
- <p>Download <a href="/blog/music/2023-03-18/audio/julia-vibrato.mp3"
- rel="me noopner"
- target="_blank">MP3</a></p></audio>
- </figure>
- <h2>Thoughts</h2>
- <p>Realistically? I love every single one of these choruses. It&#39;s
- such an amazing effect, and I was messing around with the dirty channel
- too, which still sounded great! The CB-1 was by no means a steal, but
- it&#39;s my favorite chorus tone. But it comes with some quirks being a
- late 70, early 80s device. The CE-20 is amazing but very much a &quot;mid
- 00s digital pedal&quot; giving some of that digital-ness to it,
- especially when mixing with other digital pedals. I&#39;m sure you heard
- the high pitched wine in the background. I EQ&#39;d it out, but it&#39;s
- there, and it bothers me. I think getting a CE-2w would give me a lot of
- the options I want from this, without those digital artifacts. The CE-20
- would be perfect if it had a vibrato mode, given the CE-1 has one, and
- really make it the perfect all-in-one. But given I&#39;ve had this pedal
- for at least 12 years (probably closer to 13. I can dig out the box and
- see if I kept the receipt). I got in in college as my first ever chorus.
- I was enamoured with it. I&#39;d be on my board today if it wasn&#39;t so
- big. The Julia is the perfect multi-tool chorus, and I&#39;ve been really
- happy with it. But it lacks that really SLOW rate that the Boss pedals
- have, making it a BIT harder to really dial in the CE-1 tones.</p>
- <p>I joked on mastodon that I was did this to convince myself I don&#39;t
- NEED a CE-2w or DC-2w...and now I want them even more!</p>
- </article>
- ]]>
- </description>
- </item>
- <item>
- <title>Music: Reworking my THR100HD</title>
- <link>https://www.senders.io/blog/music/2023-01-06/</link>
- <guid isPermaLink="true">https://www.senders.io/blog/music/2023-01-06/index.html</guid>
- <pubDate>Fri, 06 Jan 2023 00:00:00 -0500</pubDate>
- <description>
- <![CDATA[
- <article>
- <h1>Music Blog?!</h1>
- <p>I wanted to make a little blog section to just talk about my music
- making. Mainly, to save my friends from enduring my thinking out
- loud.</p>
- <h2>Reworking my THR100HD</h2>
- <p>I have a <a href=
- "https://usa.yamaha.com/products/musical_instruments/guitars_basses/amps_accessories/thr100hd/index.html"
- rel="external noopener noreferrer"
- target="_blank">Yamaha THR100H Dual</a> which is a nice modeling amp
- with two &quot;amps&quot;. Typically, I run these in parallel so I am
- running through BOTH at the same time. As of late I am actually
- considering moving to dialing in separate tones, and using my <a href=
- "https://www.joyoaudio.com/product/88.html"
- rel="external noopener noexternal"
- target="_blank">Joyo PXL-Live</a> to act as a &quot;channel&quot;
- switcher.</p>
- <h3>Dual Amping</h3>
- <p>Honestly, dual amping is my <em>favorite</em> thing. And I would hate
- to give it up, as it gives my tones SO much depth. But I find when I try
- to mix my guitars that extra depth just makes mixing a bit more of a
- hassle than need be. But Mick of &quot;That Pedal Show&quot; on YouTube I
- feel feels similarly, considering in <a href=
- "https://www.youtube.com/watch?v=uMvhraRDvDs"
- rel="noopener external noreferrer"
- target="_blank">one of their &quot;use less&quot; challenge videos</a>
- he used two amps for maximum tone shaping - which I feel adds some
- justification to my efforts!</p>
- <h2>Results after one night</h2>
- <p>I spent an hour or so tonight messing around with my setup and came
- out with the following high gain tone:</p>
- <figure>
- <figcaption>
- &quot;Rezzed&quot; - Hi-gain dual amped Baritone guitar
- </figcaption><audio controls=""><source src=
- "/blog/music/2023-01-06/audio/rezzed-senders-io-audio.mp3">
- <source src="/blog/music/2023-01-06/audio/rezzed-senders-io-audio.ogg">
- <p>Download <a href=
- "/blog/music/2023-01-06/audio/rezzed-senders-io-audio.mp3"
- rel="me noopner"
- target="_blank">MP3</a> or <a href=
- "/blog/music/2023-01-06/audio/rezzed-senders-io-audio.ogg"
- rel="me noopner"
- target="_blank">OGG</a></p></audio>
- <figcaption>
- <em><small>No copyright</small></em>
- </figcaption>
- </figure>
- <h3>Thoughts</h3>
- <p>I feel its a bit... boomy still. There is some extra weight coming
- from the &quot;clean&quot; channel that I think is causing this to lose
- some clarity. I don&#39;t think if I wanted to add a mix around this
- I&#39;d even end up keeping it. Or I would do some heavy EQing to that
- channel. Here is what I have dialed in so far:</p>
- <figure>
- <img src=
- "/blog/music/2023-01-06/img/thr100hd-settings-senders-io-img.jpg"
- alt=
- "A photo of the front face knobs of my Yamaha THR100HD. The top amp is set to the clean setting, the booster is turned off. The gain is roughly at 3 O&#39;Clock, Master at 9 O&#39;Clock, Bass at 10 O&#39;Clock, Middle at 2 O&#39;Clock, Presense off, Rever off, and Volume at 11 O&#39;Clock. The bottom amp is set to Modern, with the booster turned off. The gain is set to around 2:30, Master at 10 O&#39;Clock, Bass at a bit below 9 O&#39;Clock, Middle at 2 O&#39;Clock, Treble at 1 O&#39;Clock, Presents at 1:30, Rever off, and Volume a little above 9 O&#39;Clock"
- role="img"
- width="100%">
- <figcaption>
- <em>Current dual amp settings</em>
- </figcaption>
- </figure>
- <h2>Future</h2>
- <p>In the future I plan to setup different profiles between each the 5
- channels per amp - so they&#39;re all useable and I can just do single
- amping - as that provides me the FX loop until I setup a proper stereo
- board. But until then - this is the setup I&#39;ve been using and I
- rarely touch the back!</p>
- </article>
- ]]>
- </description>
- </item>
- <item>
- <title>How I Generate My RSS Feed</title>
- <link>https://www.senders.io/blog/2023-01-06/</link>
- <guid isPermaLink="true">https://www.senders.io/blog/2023-01-06/index.html</guid>
- <pubDate>Fri, 06 Jan 2023 00:00:00 -0500</pubDate>
- <description>
- <![CDATA[
- <article>
- <h1>How I Generate My RSS Feed</h1>
- <p>I only just now started supplying an RSS feed to you fine people! You
- can subscribe to it at <a href=
- "/blog/feed.rss">www.senders.io/blog/feed.rss</a>!</p>
- <p>I decided rather than manually generating the file contents I’d hook
- into my pre-existing publish scripts to be able to generate the RSS
- file.</p>
- <h2>Publishing blog posts - shell scripts ftw</h2>
- <p>In <a href="/blog/2022-11-06/">My Markdown -&gt; HTML Setup</a> I
- touch on how I publish my markdown files into HTML for this blog. But
- what I don’t <em>really</em> touch on is the shell scripts that tie the
- whole process together.</p>
- <p>What I have is two, now three, scripts that feed the whole
- process:</p>
- <ol>
- <li><code>publish-blog.sh</code> - the main script</li>
- <li><code>compile-md.sh</code> - generates the HTML output</li>
- <li><code>update-feed.sh</code> - generates/appends the RSS feed</li>
- </ol>
- <p>The <code>update-feed.sh</code> script is the new one I just
- added.</p>
- <p><code>publish-blog.sh</code> is the primary interface, I supply the
- date of the post and the path to the md file and that calls compile and
- update to automate the entire process.</p>
- <p>Without going into TOO much detail you can view the latest versions of
- the scripts at <a rel="external noopener noreferrer"
- target="_blank"
- href=
- "https://git.senders.io/senders/senders-io/tree/">git.senders.io/senders/senders-io/tree/</a>.</p>
- <p>But the gist of the scripts is I parse out the necessary details,
- find/replace some tokens in template files I have setup for headers and
- footers, and concat the outputs into the final output HTML files, and now
- RSS feed.</p>
- <h3>update-feed.sh</h3>
- <p>Source File: <a rel="external noopener noreferrer"
- target="_blank"
- href=
- "https://git.senders.io/senders/senders-io/tree/update-feed.sh">git.senders.io/senders/senders-io/tree/update-feed.sh</a></p>
- <p>This script is pretty interesting. I didn’t want to deal with any XML
- parsers and libraries to just maintain a proper XML rss file and push
- items into the tree. Rather, I just follow a similar setup to my markdown
- generation. I leverage some temporary files to hold the contents, a
- static temp file for the previously generated content, and at the end
- swap the temp file with the real file.</p>
- <p>I take in an input of the publish date (this is the date from the
- publish script), the title, and the HTML file path. These are all already
- variables in the publish script, but also something I can manually supply
- if I need to publish an older article, or something I wrote directly in
- HTML.</p>
- <p>The core of the script is found here:</p>
- <pre><code>PUBDATE=$(date -d &quot;$1&quot; -R)
-TITLE=$2
-FILE_PATH=$3
-PERMALINK=$(echo &quot;${FILE_PATH}&quot; | sed -e &quot;s,${TKN_URL_STRIP},${URL_PREFIX},g&quot;)
-LINK=$(echo &quot;${PERMALINK}&quot; | sed -e &quot;s,${TKN_INDEX_STRIP},,g&quot;)
-
-# Generate TMP FEED File Header
-
-cat -s $FILE_RSS_HEADER &gt; $FILE_TMP_FEED
-sed -i -E &quot;s/${TKN_BUILDDATE}/${BUILDDATE}/g&quot; $FILE_TMP_FEED
-sed -i -E &quot;s/${TKN_PUBDATE}/${PUBDATE}/g&quot; $FILE_TMP_FEED
-
-# Generate TMP Item File
-
-cat -s $FILE_RSS_ITEM_HEADER &gt; $FILE_TMP_ITEM
-sed -i -E &quot;s~${TKN_TITLE}~${TITLE}~g&quot; $FILE_TMP_ITEM
-sed -i -E &quot;s/${TKN_PUBDATE}/${PUBDATE}/g&quot; $FILE_TMP_ITEM
-sed -i -E &quot;s,${TKN_PERMALINK},${PERMALINK},g&quot; $FILE_TMP_ITEM
-sed -i -E &quot;s,${TKN_LINK},${LINK},g&quot; $FILE_TMP_ITEM
-sed -n &quot;/&lt;article&gt;/,/&lt;\/article&gt;/p&quot; $FILE_PATH &gt;&gt; $FILE_TMP_ITEM
-cat -s $FILE_RSS_ITEM_FOOTER &gt;&gt; $FILE_TMP_ITEM
-
-# Prepend Item to items list and overwrite items file w/ prepended item
-## In order to &quot;prepend&quot; the item (so it&#39;s on top of the others)
-## We need to concat the tmp item file with the existing list, then
-## we can push the contents over the existing file
-## We use cat -s to squeeze the blank lines
-cat -s $FILE_ITEM_OUTPUT &gt;&gt; $FILE_TMP_ITEM
-cat -s $FILE_TMP_ITEM &gt; $FILE_ITEM_OUTPUT
-
-# Push items to TMP FEED
-cat -s $FILE_ITEM_OUTPUT &gt;&gt; $FILE_TMP_FEED
-
-# Push RSS footer to TMP FEED
-cat -s $FILE_RSS_FOOTER &gt;&gt; $FILE_TMP_FEED
-echo $FILE_TMP_FEED
-
-# Publish feed
-cat -s $FILE_TMP_FEED &gt; $FILE_RSS_OUTPUT
-
-echo &quot;Finished generating feed&quot;
-</code></pre>
- <p>Some key takeaways are:</p>
- <ol>
- <li>sed lets you do regex with delimiters that AREN’T <code>/</code> so
- you can substitute something that shouldn’t actually ever show up in
- your regex. For me that is <code>~</code>.</li>
- <li>I always forget you can use sed to extract between tokens - which
- is how I get the CDATA for the RSS: <code>sed -n
- &quot;/&lt;article&gt;/,/&lt;\/article&gt;/p&quot;</code></li>
- <li><code>mktemp</code> is really REALLY useful - and I feel is under
- utilized in shellscripting</li>
- </ol>
- <p>The obvious cracks are:</p>
- <ol>
- <li>I rely SO much on <code>sed</code> that it’s almost certainly going
- to break</li>
- <li>I don’t have much other flag control to do partial generation - so
- if I need to do something either starting partway through or not finish
- the full process, I don’t have that.</li>
- <li>Sometimes things can break silently and it will go through, there
- is no verification or like manual checking along the way before
- publishing the feed.rss</li>
- </ol>
- <p>The final two can easily be managed by writing the feed to a location
- that isn’t a temp file and I can manually do the <code>cat -s
- $FILE_TMP_FEED &gt; www/blog/feed.rss</code> myself after I check it
- over.</p>
- <p>But for now I’ll see if I ever have to redo it. I don’t think anyone
- will actually sub to this so I don’t really need to care that much if I
- amend the feed.</p>
- <h2>Where to put the feed URL</h2>
- <p>I never intended to provide an RSS feed. I doubt anyone but me reads
- this, and from my previous experience with gemini feed generation was a
- bit of a headache.</p>
- <p>A quick aside: I really only decided thanks to Mastodon. I was
- thinking during the Twitter meltdown “what if twitter but RSS” (I know
- super unique idea). But basically like a true “microblog”. And some OSS
- tools to publish your blog. This got me reading the RSS spec and looking
- into it more - which then lead me down the using the RSS readers more (in
- conjunction with gemini, and Cortex podcast talking about using RSS
- more).</p>
- <p>But I’ve decided to just put the RSS feed in the blog index, on my
- homepage, and that’s it. I don’t need it permanently in the header.</p>
- <h2>Conclusion</h2>
- <p>I didn’t have much to share here, it doesn’t make too much sense to
- write a big post on what can be explained better by just checking out the
- shell scripts in my git source. The code speaks better than I ever
- could.</p>
- <p>I really, really like shell scripting.</p>
- </article>
- ]]>
- </description>
- </item>
- <item>
- <title>Music Spotlight: My Top Album 2022</title>
- <link>https://www.senders.io/blog/2023-01-03/</link>
- <guid isPermaLink="true">https://www.senders.io/blog/2023-01-03/index.html</guid>
- <pubDate>Tue, 03 Jan 2023 00:00:00 -0500</pubDate>
- <description>
- <![CDATA[
- <article>
- <h1>Music Spotlight: My Top Album 2022</h1>
- <p>The hype is real. I only recently wrote last years, so I bet your hype
- is nonexistent but for me I was writing that knowing full well there were
- some bangers waiting to be unleashed in this year end review!</p>
- <p>If you hadn’t read my previous post for 2021 the link is at the
- bottom:</p>
- <blockquote>
- <p>The winner was “KANGA - You and I Will Never Die”</p>
- </blockquote>
- <h2>The album pool</h2>
- <p>As always the criteria:</p>
- <ul>
- <li>it was released in 2022</li>
- <li>it wasn’t a single</li>
- <li>if it was an EP it has to be substantial and intentional</li>
- </ul>
- <p>And the albums are…</p>
- <ul>
- <li>Amining for Enrike - The Rats and the Children</li>
- <li>And So I watch You from Afar - Jettison</li>
- <li>Astronoid - Radiant Bloom</li>
- <li>Carpenter Brut - Leather Terror</li>
- <li>Cult of Luna - The Long Road North</li>
- <li>Dance With the Dead - Driven to Madness</li>
- <li>Elder - Innate Passage</li>
- <li>Emma Ruth Rundle - EG2: Dowsing Voice</li>
- <li>Giraffes? Giraffes! - Death Breath</li>
- <li>God Mother - Obeveklig</li>
- <li>Jay Hosking - Celestial spheres (and various other releases)</li>
- <li>Long Distance Calling - Eraser</li>
- <li>Ludovico Technique - Haunted People</li>
- <li>MWWB - The Harvest (Mammoth Weed Wizard Bastard)</li>
- <li>MØL - Diorama (Instrumental)</li>
- <li>Psychostick - … and Stuff</li>
- <li>Russian Circles - Gnosis</li>
- <li>SIERRA - See Me Now</li>
- <li>Starcadian - Shadowcatcher</li>
- <li>Tina Dickow - Bitte Små Ryk</li>
- <li>Toundra - Hex</li>
- <li>Waveshaper - Forgotten Shapes</li>
- </ul>
- <p>2022’s playlist (+ 2 albums from bandcamp not on Spotify):</p>
- <ul>
- <li>
- <a rel="external noopener noreferrer"
- target="_blank"
- href=
- "https://open.spotify.com/playlist/2TCd910OyZcTjQ8l8Dc0Jy?si=efd0dc6286b84062">
- [spotify] senders&#39; Releases 2022 Spotify Playlist</a>
- </li>
- <li>
- <a rel="external noopener noreferrer"
- target="_blank"
- href=
- "https://emmaruthrundle.bandcamp.com/album/eg2-dowsing-voice">[bandcamp]
- Emma Ruth Rundle - EG2: Dowsing Voice</a>
- </li>
- <li>
- <a rel="external noopener noreferrer"
- target="_blank"
- href=
- "https://jayhosking.bandcamp.com/album/celestial-spheres">[bandcamp]
- Jay Hosking - Celestial spheres</a>
- </li>
- </ul>
- <h2>The Top 5</h2>
- <p>In alphabetical order:</p>
- <ul>
- <li>Carpenter Brut - Leather Terror</li>
- <li>Elder - Innate Passage</li>
- <li>Emma Ruth Rundle - EG2: Dowsing Voice</li>
- <li>Jay Hosking - Celestial spheres (and various other releases)</li>
- <li>Tina Dickow - Bitte Små Ryk</li>
- </ul>
- <h2>Carpenter Brut - Leather Terror</h2>
- <p>Some metal infused synthwave, Carpenter Brut managed to release a
- catchy and heavy banger of an album. Featuring a few guest performers,
- each of these tracks are unique and catchy in what I would consider a
- very “same-y” genre. It’s nice having an infinite supply of retro synth
- tracks to drive to, but sometimes it’s hard for one to really break
- through into “oh shit yes!”. Typically, Starcadian is the one to do that
- for me, as they add an extra layer to their tracks through their music
- videos (each track being an “ear movie”).</p>
- <p>Throughout the year I found myself coming back to a few tracks over
- and over - especially when I was showering or doing some other short
- activity and I just wanted something upbeat and fun as heck!</p>
- <p>Some call out featured songs are The Widow Maker featuring Gunship,
- Imaginary Fire featuring Greg Puciato, and Lipstick Masquerade featuring
- Persha. I looped these three songs quite a bit. But there are quite a few
- more to checkout.</p>
- <h3>Favorite Track</h3>
- <p>This is tough, as I looped those three songs quite a bit - each
- bringing their own unique energy. So I’ll pick all three - my list my
- rules:</p>
- <ul>
- <li>
- <p>The Widow maker - feat. Gunship This track is representative of
- the genre. It’s synthwave to the core.</p>
- </li>
- <li>
- <p>Imaginary Fire - feat. Greg Puciato This is a metal track with
- synths. Greg Puciato (of The Dillinger Escape Plan fame) is one of my
- favorite vocalists and is immensely talented. This is probably my
- favorite because I can’t get enough of his vocal style - the screams
- and the clean vocals!</p>
- </li>
- <li>
- <p>Lipstick Masquerade - feat. Persha This is a modern 80s track.
- This is what retrowave was designed around and while tracks like The
- Widow Maker are more typical of the genre, this is the song they all
- are basing their sound off of. This is kill pop song.</p>
- </li>
- </ul>
- <h3>Special Commendation - Non Stop Bangers</h3>
- <p>You throw this album on and it hits you with just banger after banger.
- I can’t keep myself from dancing. Even as I listen back as I write this
- gemlog I am grooving in my chair! Like Kanga last year, this is just a
- series of tracks that just make you dance.</p>
- <h3>Album Link</h3>
- <p><a rel="external noopener noreferrer"
- target="_blank"
- href=
- "https://open.spotify.com/album/37PW0ipoWcjx3APS1MN0ql?si=HE0-siOqTsqVlJrlL9MWTw">
- [spotify] Carpenter Brut - Leather Terror</a></p>
- <h2>Elder - Innate Passage</h2>
- <p>I toot’d a bit about this album, a later release in the year, this
- took this year end review and flipped it on its head. I thought it was
- wrapped up already with a separate release this year, but this makes the
- decision so hard.</p>
- <p>Elder came at us with what feels like a return to form. Having
- previously released Omens in 2020 and a collaboration album in 2021,
- Innate Passage takes the best parts of those two albums and builds on-top
- of more “classic Elder” albums like Lore. Elder has carved out their own
- niche in the genre making a blend of psych rock and stoner metal, with
- each release leaning harder and harder into psychedelic realms. Innate
- Passage has this almost ethereal feeling - especially in their opening
- track Catastasis.</p>
- <p>I think, however, they’ve left the doom and stoner metal behind. Dead
- Roots Stirring and Elder (self titled) were certainly “Doomy” and in that
- “doom/stoner” metal overlap. Lore, Reflections of a Floating World are
- both still very “stoner metal”. But is playing psychedelic-metal with a
- big muff automatically stoner metal? I think since Omens they’re
- probably, as a band, firmly outside of the stoner metal field - and more
- soundly in some psychedelic/prog metal genre?</p>
- <p>They introduce themselves as such in their website actually!</p>
- <figure>
- <blockquote>
- <p>genre-pushing rock band&nbsp;that melds heavy psychedelic sounds
- with progressive elements and evocative soundscapes.</p>
- </blockquote>
- <figcaption>
- <cite>— <a rel="external noopener noreferrer"
- target="_blank"
- href=
- "https://beholdtheelder.com/elder-bio/">https://beholdtheelder.com/elder-bio/</a></cite>
- </figcaption>
- </figure>
- <p>“Merged In Dreams - Ne Plus Ultra” is the track that flips this whole
- argument on its head and shows that regardless, they’re still very much a
- metal band and one that you’ll absolutely be head banging too, horn up
- \m/.</p>
- <h3>Favorite Track</h3>
- <p>I think “Merged In Dreams - Ne Plus Ultra”. A nearly 15 minute track
- that has everything in it you expect from Elder.</p>
- <h3>Special Commendation - Excellent Vinyl Record Cover</h3>
- <p>I LOVE their record covers when they do the circular inserts. You can
- display this vinyl with having 3 separate views through the port, which
- while purely aesthetic - it’s very nice!</p>
- <p>The quality of the vinyl release was great, though I find any
- non-black Vinyl has a 33% chance of being slightly warped upon arrival. I
- am going to stick to traditional black vinyls from now on sadly. It’s too
- freaking often</p>
- <h3>Album Link</h3>
- <p><a rel="external noopener noreferrer"
- target="_blank"
- href=
- "https://open.spotify.com/album/5XClGjeje4c3qPjbtT898K?si=PFgsT8S_TD6hu4dwbFp3Jw">
- [spotify] Elder - Innate Passage</a></p>
- <h2>Emma Ruth Rundle - EG2: Dowsing Voice</h2>
- <p>Her second album in her “Electric Guitar” series - Emma Ruth Rundle
- (ERR from here on out) has released “Dowsing Voice” a haunting follow-up
- to last years Engine of Hell. Holy holy HOLY hell, this album is an
- impactful, artistic, just WOW. It’s hard to describe. I was listening to
- it for this review and my partner, sitting behind me relaxing, said “What
- the hell are you listening too, this is scary!”. And scary, emotional,
- and difficult it is. ERR stretches the use of the “electric guitar”
- title, as the focus here is the additional layers and voices added on-top
- of the main tracks.</p>
- <p>An experimental release that, at this time is only available on
- bandcamp, is one I don’t put on frequently, but when I do am fully
- captivated. If you like artistic records - please check this out.</p>
- <h3>Favorite Track</h3>
- <p>Probably: Keening into Ffynnon Llanllawer - I love the guitar(?) part
- and the wailing/vocalization. It’s haunting. As a recording is
- amazing.</p>
- <p>Though “In the Cave of The Cailleach’s Death-Birth” is the /best/
- track. Put some headphones on and give this a listen! Just amazing.</p>
- <h3>Special Commendation - Album Art</h3>
- <p>This album, IS ART, but the album art is just… really suiting the
- music.</p>
- <h3>Album Link</h3>
- <p><a rel="external noopener noreferrer"
- target="_blank"
- href=
- "https://emmaruthrundle.bandcamp.com/album/eg2-dowsing-voice">[bandcamp]
- Emma Ruth Rundle - EG2: Dowsing Voice</a></p>
- <h2>Jay Hosking - Celestial spheres (and various other releases)</h2>
- <p>This is an interesting pick. Having released JUST in time for this
- year, this is an album I have been engaging with in many, many ways.
- Firstly, I am a patron of this performer via Patreon. They make music
- videos (audio only performance videos of the songs) that they compile
- into albums. Last year’s album is probably my actual favorite and likely
- SHOULD’VE snuck into the top 5 because of the final track alone, which
- was an emotional and just epic banger of a track (Linked at the bottom of
- this review).</p>
- <p>Celestial spheres is a compilation of 8 synth jams. Jay bills these as
- semi-improvisational, and while the YT channel is a synth nerds dream of
- these informative performances, the songs stand on their own. This one is
- no exception. Using various different pieces of hardware synths,
- grooveboxes, drum machines and traditional instruments - each track is
- unique while still carrying this /energy/ and style. It’s so easy to hear
- Jays tracks and know it’s him.</p>
- <p>I’ve been following him for years and really enjoy the music he makes,
- and the community he’s built up around his music. Due to the disconnected
- nature of the singles (releasing effectively as YouTube videos prior to
- the album drop) it’s difficult to ultimately rate these in these lists
- since I don’t get a chance to really enjoy them /as an album/ until the
- end of the year (the past two times happened like this where they came
- out around the end of the year). And on my playlist “Future, Tense” is
- present as it’s a “2022” album according to Spotify, but was out on
- bandcamp in 2021, and that’s when I was gifted it by Jay.</p>
- <p>So yeah - this whole section is like “disclaimer disclaimer” but if
- you like groovy, typically instrumental synth music - check it out.</p>
- <h3>The various other releases</h3>
- <p>This year Jay released a few albums actually which I didn’t want to
- include separately. If you enjoy this album (which was mostly comprised
- of 2022 music, so was the primary focus) check out the other albums:</p>
- <p><a rel="external noopener noreferrer"
- target="_blank"
- href=
- "https://jayhosking.bandcamp.com/album/cinematic-works">https://jayhosking.bandcamp.com/album/cinematic-works</a>
- <a rel="external noopener noreferrer"
- target="_blank"
- href=
- "https://jayhosking.bandcamp.com/album/away-music-for-a-productive-day">https://jayhosking.bandcamp.com/album/away-music-for-a-productive-day</a>
- <a rel="external noopener noreferrer"
- target="_blank"
- href=
- "https://jayhosking.bandcamp.com/album/home-music-for-a-productive-day">https://jayhosking.bandcamp.com/album/home-music-for-a-productive-day</a></p>
- <h3>Favorite Track</h3>
- <p>Without out a doubt it’s Nychthemeron. It’s truly a wild track, with
- so much happening in it. I suspect it was his favorite too since he made
- an actual music video for it:</p>
- <p><a rel="external noopener noreferrer"
- target="_blank"
- href="https://www.youtube.com/watch?v=Ka-xE3Qo3dA">[youtube] Jay
- Hosking - Nychthemeron (Official Music video)</a></p>
- <h3>Special Commendation - Each track has a live performance attached to
- it!</h3>
- <p>If you enjoy videos - these each have a corresponding YT video linked
- at the bottom of the bandcamp page.</p>
- <h3>Album Link</h3>
- <p><a rel="external noopener noreferrer"
- target="_blank"
- href=
- "https://jayhosking.bandcamp.com/album/celestial-spheres">[bandcamp]
- Jay Hosking - Celestial spheres</a></p>
- <h2>Tina Dickow - Bitte Små Ryk</h2>
- <p>Tina Dickow (sometimes credited as Tina Dico, depending on the
- release) is a fantastic Danish singer songwriter. Since her first solo
- album she’s really found a way to elevate what is just folk indie pop.
- Her songwriting, arrangements, and performances are always so rich. She
- knows when to strip the song back - like Chefen Skal Ha&#39; Fri - while,
- has certainly a lot happening beneath the lyrics - mixes them back a bit
- to let the layered vocals cut through as the song builds. Each song has
- so much to listen to! Picking out various instruments, layers, yet every
- song would work performed just her and her acoustic guitar. I find her
- style of pop music to be very engaging for that reason. I don’t often
- listen to this style of music, but the production behind each track is so
- good it hooks me in. That and her beautiful voice - which drew me in
- first.</p>
- <p>It’s a bit harder to talk about this album given the language barrier
- (I do not speak Danish!) Which is a shame, since her lyrics are often
- what I love about some of her previous albums. I’ve read the translations
- and done my own as a learning exercise, but there is a layer missing
- which is a shame given how strong this album is as whole.</p>
- <p>I’ve spoken about Tina before in two previous gemlogs (<a href=
- "gemini://senders.io/gemlog/2021-04-27-music-spotlight-awesome-eps.gmi">Music
- Spotlight: Awesome EPs</a> and <a href=
- "gemini://senders.io/gemlog/2021-05-18-5x5-playlists.gmi">5x5
- Playlists</a> (both gemini:// links)) and is one of my absolute favorite
- artists of all time. I’ve been slowly collecting her entire discography,
- which can be tricky, given a lot of copies are out of print and the
- remaining stock/used copies are often in Europe. (And that 5x5 playlist
- is very telling given most of those artists have been featured in my top
- albums lists and were winners! Is this foreshadowing?!)</p>
- <h3>Favorite Track</h3>
- <p>I shouldn’t have introduced this section - it has been so hard each
- time! I think the title track, Bitte Små Ryk. It’s got everything there,
- and is representative of the albums sound.</p>
- <h3>Special Commendation - Lovely</h3>
- <p>This whole album is lovely. There is emotion here too, and while I
- don’t speak the language its often very clear. But I love Tina and her
- music. It’s lovely and hits this spot in me thats just warm.</p>
- <h3>Album Link</h3>
- <p><a rel="external noopener noreferrer"
- target="_blank"
- href=
- "https://open.spotify.com/album/6YV4Gomk4iy0dUyVqPDN7T?si=e3wO7G3XTI-ZIwhOSCswJA">
- [spotify] Tina Dickow - Bitte Små Ryk</a></p>
- <h2>My Top Pick</h2>
- <p>This year has been especially hard, since I spent so much time
- listening to 2021s releases which are some of my favorite of all time.
- And between 2021 and 2022 (and mentioned in my 2021 spotlight) nearly
- every one of my favorite artists released an album. So I have been
- blessed with a lot to listen to.</p>
- <p>Anyone following me on mastodon may have seen Tina Dickow just owning
- my entire wrapped campaign, but with Elder releasing their album after
- the data collection stops for wrapped, that certainly isn’t telling the
- whole story.</p>
- <p>And it wouldn’t be a top album list if I didn’t mention Starcadian
- being consistently in the top 10 year after year, just narrowly missing
- the top 5 - though technically, this release was in my 2020s list, as it
- was available then, but had since been pulled, and was released
- “officially” in 2022. Looking at what I can see it’s the same tracklist,
- but the “inspired by” credits are entirely gone from the 2022
- release.</p>
- <h3>Elder - Innate Passage</h3>
- <p>Each year picking the winner is hard. Part of the reason I do this is
- I don’t really add stuff to the list I don’t like. A LOT of music comes
- out each year, and I add what I listen to. I don’t listen to music I
- don’t like - so by nature of the process - each album is a “top album”
- for me.</p>
- <p>But the top 5 is usually a mix of “omg obvs” and “yeah turns out I
- threw that on way more than I expected” (Carpenter Brut). But its really
- always a fight between those “obvs” - this year was Elder and Tina
- Dickow. Their releases were seriously top tier and repeat listens.</p>
- <p>Tina came in with the advantage of releasing in April, and Elder JUST
- released theirs at the end of November. But I did some math on my
- mastodon breaking down the comparison. Elder came at us with a longer
- albums, under half as many tracks, and over 2x the average song length
- (about 10min/track).</p>
- <p>They didn’t waste a single second (neither did Tina) but just being
- such an accessible album - just direct pure energy and power - BOOM! It
- was great.</p>
- <h3>This should’ve been a tie</h3>
- <p>Honestly, I was ready to call it a tie. I am actually writing this
- minutes before posting it, because that’s how undecided I am and how
- close this is.</p>
- <p>Tina Dickow deserves the number one slot any other year, and both her
- and Elder’s albums I hope to see more of in the next few years! Both are
- classic albums in their discographies (both albums of which I own and
- spin regularly). I forced myself to pick, and just knowing me, my tastes,
- and all the stuff I said above - I went with Elder. But seriously, listen
- to this record - Tina manages to pack so much musicality in carving out a
- unique sound and just amazing style. I love her &lt;3 :)</p>
- <p>And if her music isn’t your jam - check out her guest tracks on the
- Zero-7 stuff - angelic voice.</p>
- <h2>Conclusion</h2>
- <p>I am REALLY disappointed I had to choose between Elder and Tina Dickow
- this year. Similarly, last year I had Raised by Swans, ERR, and Kanga!
- And our winner in 2020 was Bell Witch. These ARE my top six favorite
- musical artists currently active.</p>
- <p>I’ll talk about music trends and my tastes later on. But I just wanted
- to emphasize how much of a banger these last 3 years have been musically
- and I am grateful I get to share these with you here.</p>
- <p>I am really excited for 2023!</p>
- <h2>This year’s playlist (2023)</h2>
- <p><a rel="external noopener noreferrer"
- target="_blank"
- href=
- "https://open.spotify.com/playlist/4zgdFBZslkcEq0xYFyME7U?si=4bc2bf7d015c4254">
- [spotify] senders&#39; Releases 2023 Playlist</a></p>
- <h2>Links</h2>
- <p>If you use gemini:// you can check out my previous posts (until/unless
- I decided to port those over too)</p>
- <ul>
- <li>
- <a href=
- "gemini://senders.io/gemlog/2022-11-30-music-spotlight-top-album-2021.gmi">
- [gemini] Music Spotlight: Top Album 2021</a>
- </li>
- <li>
- <a href=
- "gemini://senders.io/gemlog/2021-03-21-music-spotlight-top-album-2020.gmi">
- [gemini] Music Spotlight: Top Album 2020</a>
- </li>
- </ul>
- <p>Thanks for reading! I don’t always crosspost - I am trying something
- out :)</p>
- </article>
- ]]>
- </description>
- </item>
- <item>
- <title>RSS - A Follow-up</title>
- <link>https://www.senders.io/blog/2022-12-31/</link>
- <guid isPermaLink="true">https://www.senders.io/blog/2022-12-31/index.html</guid>
- <pubDate>Sat, 31 Dec 2022 00:00:00 -0500</pubDate>
- <description>
- <![CDATA[
- <article>
- <h1>RSS - A Follow-up</h1>
- <p>Get an RSS reader and connect everything to it!</p>
- <p>Between switching to Mastodon for my social media allowance, and using
- a dedicated RSS reader has really cut down my overall consumption and
- wasted PC time.</p>
- <blockquote>
- <p>this blogpost is originally posted to my gemini gemlog: <a href=
- "gemini://senders.io/gemlog/2022-12-31-rss-a-follow-up.gmi">gemini://senders.io/gemlog/2022-12-31-rss-a-follow-up.gmi</a>
- which is where I do most of my writing, converting some useful to share
- things over here. It is also where the original RSS gemlog this is a
- follow-up to was posted. For context, I wanted to cutback on a lot of
- my web consumption, wasting time and just being mindless online. So I
- looked to RSS to help centralize and solve this issue.</p>
- </blockquote>
- <h2>Recap</h2>
- <p>So I am using <a rel="external noopener noreferrer"
- target="_blank"
- href="https://tt-rss.org">https://tt-rss.org/</a> as my RSS
- aggregator. It’s a self-hosted RSS aggregator that, using profiles,
- allows you to subscribe to multiple feeds and have them “synced”
- between multiple devices (they’re not synced, you’re connecting to a
- central server). I like this because I don’t ever have to worry about
- dismissing, reading, or marking anything on my phone to have it still
- present on my PC. And I don’t have to worry about feed subscriptions
- or my phone pinging a bunch of feeds, or obviously, any third-party
- hosting.</p>
- <h2>How I’ve been using it</h2>
- <p>So as always, please send me interesting RSS feeds! Or even your own!
- I am trying to read more blogs, and if you have something you enjoy drop
- me a DM or email! I’ll share what I am following throughout this section
- &lt;3</p>
- <h3>Blogs</h3>
- <p>Obviously, I am following blogs, one of the last holdouts of RSS. I
- have a few that I follow, mostly other transfolk on Mastodon that I found
- had their own blogs. Most non-trans folks I follow are using gemini and
- still rely on the feed aggregators for that.</p>
- <p>If you’re interested the two main ones I am reading right now are:</p>
- <ol>
- <li>
- <a rel="external noopener noreferrer"
- target="_blank"
- href="https://erininthemorn.substack.com">Erin In The Morn
- (substack)</a>
- </li>
- <li>
- <a rel="external noopener noreferrer"
- target="_blank"
- href="https://www.selfawaresoup.com/">Selfaware Soup</a>
- </li>
- </ol>
- <p>Which have been pretty insightful. Erin sharing a lot of US
- transgender news, which is good since I have dropped off using Reddit
- which is where I “got” my “news” from.</p>
- <h3>Podcasts</h3>
- <p>The other mainstay in RSS is podcasts. Some even say if a podcast
- can’t be consumed via RSS, is it even a podcast? I would agree.
- Everything else is just a show. I don’t <em>need</em> the content to be
- consumable from my reader, but I’d really appreciate it if were. I am
- always on the lookout for more podcasts though. With the only two
- consistent listens being:</p>
- <ol>
- <li>
- <a rel="external noopener noreferrer"
- target="_blank"
- href="https://www.relay.fm/penaddict">The Pen Addict Podcast
- (relay.fm)</a>
- </li>
- <li>
- <a rel="external noopener noreferrer"
- target="_blank"
- href="https://www.relay.fm/cortex">Cortex Podcast (relay.fm)</a>
- </li>
- </ol>
- <p>And currently off-season:</p>
- <ul>
- <li>
- <a rel="external noopener noreferrer"
- target="_blank"
- href="https://www.relay.fm/backmarkers">Backmarkers Podcast
- (relay.fm)</a>
- </li>
- </ul>
- <p>Which has a YouTube video format. Though, I honestly really don’t care
- for Austin Evans, I just enjoy consuming some F1 content and pretending I
- have friends I can talk to about motor racing.</p>
- <p>While writing this section I added:</p>
- <ul>
- <li>
- <a rel="external noopener noreferrer"
- target="_blank"
- href="https://inside.java/podcast/">Inside.java Podcast</a>
- </li>
- </ul>
- <p>I have yet to listen, some of the topics seem interesting and being
- infrequent gives me hope its quality over quantity. (And I like having
- podcasts for chores to distract my brain)</p>
- <h3>Tech News</h3>
- <p>Right now I follow two main news sources in tech:</p>
- <ol>
- <li>
- <a rel="external noopener noreferrer"
- target="_blank"
- href="https://www.debian.org/News/">debian.org/news</a>
- </li>
- <li>
- <a rel="external noopener noreferrer"
- target="_blank"
- href="https://lwn.net/">LWN.net</a>
- </li>
- </ol>
- <p>Running servers using stable debian - it’s good to know when security
- updates come in, as well as distro updates. And LWN is fantastic, I’ve
- been a subscriber for many years and while sometimes (Jake) can focus a
- bit heavy on Python news, has been always interesting to read.</p>
- <p>This is the section I plan on adding more and more to. I had other
- tech blogs that just felt like clutter and were pushing out daily
- articles that I couldn’t care less about (opensource.com cough cough).
- But that’s just me. Tech news is mainly where I want to focus - since
- fluff blogs are rarely my cup of tea.</p>
- <p>LWN has some links in their weekly editions for other news feeds I
- might consider directly subscribing too, but for now I have these.</p>
- <h3>Music News</h3>
- <p>Some folk have an RSS feed for their site updates, which I appreciate.
- Some use sites like Squarespace but don’t properly connect up the RSS
- feed which I do NOT appreciate.</p>
- <p>So right now I have two bandsites that DO update it seems (as their
- site aligns with the feed) - but the only one I’ll mention is: <a rel=
- "external noopener noreferrer"
- target="_blank"
- href="https://raisedbyswans.com/">raisedbyswans.com</a> I’ve spoken of
- this artist in my Music Spotlight MANY times and is one of my
- favorites. His site, while entirely simple, is setup with RSS and has
- been publishing his updates consistently. I appreciate this. Always a
- strong rec from me!</p>
- <p>I’ve been toying with Music Review sites that talk about new releases
- in the genres they specialize in, but I haven’t settled on anything that
- is helping me discover new music.</p>
- <h3>YouTube</h3>
- <p>This is probably where the biggest change has actually come in. Having
- my YouTube feed fed through RSS has been fantastic. I am able to not only
- refresh and not miss any updates (since YouTube sometimes likes to pull
- updates in out of order than I don’t see it because it’s buried between
- some other videos that I’d already seen.</p>
- <p>But this also allows me one further level of filtering on my YouTube
- subscriptions. I can stay subscribed to channels I am interested in
- watching <em>occasionally</em> but not every video, and keep those off my
- RSS feed. And for the “I like to watch most if not all the new videos” I
- can subscribe to those via RSS. So it’s like the “bell” but without the
- app basically. And since on Mobile I do NOT use the YouTube app (so I can
- take advantage of the Ad Blocker in Firefox) that’s great!</p>
- <p>What sucks / is tricky is actually subscribing to the RSS feeds
- because YouTube buried that feature now. You just need the channel_id or
- the username and you can subscribe using the following URL:</p>
- <pre><code>https://www.youtube.com/feeds/videos.xml?channel_id={ID}
-</code></pre>
- <p>And you can obtain the channel_id either using the URL (though with
- aliases now (@channelname) its rare to see a channel_id in the URL) if
- present otherwise a little console JS can print it out:</p>
- <pre><code>ytInitialData.metadata.channelMetadataRenderer.externalId
-</code></pre>
- <p>A note however - you’ll need to clear the console if you navigate to
- the next channel, at least in Firefox, it caches the result otherwise and
- you’ll print out the duplicate value. There are some tools where you can
- print your subscribers list into these feed URLs and bulk subscribe. I’ve
- lost the link (and it’s what I did initially) but I recommend doing the
- manual add at least to focus on the channels you WANT in RSS, since you
- can always fallback to the main subscriptions page on YouTube.</p>
- <p>But what this has given me is the ability to effectively ignore
- YouTube almost entirely. Ideally, I’d script something with YouTube-dl
- but I don’t REALLY care that much, and I’ve gotten into the habit of
- closing the tab after the video so I don’t stick around and get sucked
- into the algorithm.</p>
- <p>What my morning looks like is sitting down, switching to my tt-rss
- tab, seeing what’s fresh, and watching a video with my coffee maybe, then
- just moving on and doing something else. I still lurk Mastodon, or get
- sucked into my computer in some way or another, but it’s been really
- positive! I can count on one hand how many times since dedicating to RSS
- I’ve just clicked around YouTube.</p>
- <h3>Hobby</h3>
- <p>The last section which really is an extension of Blogs/News is “hobby”
- RSS feeds. These feed a bit into the consumerist side of life and why I
- keep them separate. Right now it’s almost <em>entirely</em> fountain pen
- related (Who&#39;da thought this community would still be writing blogs
- :P) but since most of the blog posts are either about products or reviews
- in some way, I try and limit how much I expose myself to them. I have
- been working on a draft about consumerism for quite a while now and just
- haven’t really worked it into a post that isn’t just DAE consumerism BAD?
- low-effort Toot level. (But basically, I kinda hate how all my hobbies,
- and hobbies in general rely heavily on a consumerism mindset, GAS, and
- such). So I’ve been trying to be more appreciative of what I already have
- and such.</p>
- <p>But these blogs are nice, and often keep in the know about my hobbies
- and can react to anything meaningful that’s being released. A good video
- sorta on this topic was by Adam Neely(<a rel=
- "external noopener noreferrer"
- target="_blank"
- href="https://www.youtube.com/v/mHoljbkyAEs">Adam Neely - How In-Ear
- Monitors are Making Better Musicians</a>), and how his band spend
- $6000 on gear for their tour, but what it did was eliminate stress and
- enable them to more easily fine tune and control how they monitor
- their live performance. He touches on the fact that gear videos feed
- into the consumerist mindset of music making, but gear is often
- necessary to facilitate certain things, and setting up a portable
- in-ear-monitor rig for their entire band is well… unavoidable. It’s
- just a minor aside in a much deeper video about IEMs and touring and
- FEEL. And quite the departure from his usual music education content.
- But it sums up the main thesis of my consumerism gemlog quite nicely I
- feel (or at least I am projecting my thoughts into a brief aside he
- makes).</p>
- <h2>tt-rss - in retrospect</h2>
- <p>So tt-rss is <em>fine</em> honestly, I think I need to setup a better
- theme, something that has a bit more contrast. I don’t REALLY read in it,
- I just use it as the aggregator and then open the links directly. I don’t
- mind the way it renders the full articles with images, but I do mind how
- GREY it is by default (in “night” theme). It looks totally customizable
- and I bet I can download a decent theme for it if I look. But I may spend
- some time doing that and try and read more in application.</p>
- <p>But other than that it’s been quite the improvement over my internet
- experience. More RSS!!</p>
- <h2>Conclusion</h2>
- <p>I need more feeds, as I do enjoy reading. So I’m always on the look
- out. I hate to throw in engagement-y things like “let me know” stuff but
- I am genuinely looking for interesting suggestions for stuff you might
- subscribe to over RSS. Even if it’s just “this is my webblog” :) I always
- like reading people’s things. I should troll the aggregators and look at
- folks capsule landings to see what is linked!</p>
- <p>Anyway, you should look into getting an RSS aggregator setup. It’s
- been really impactful on cutting down on internet scrolling and
- mindlessness.</p>
- </article>
- ]]>
- </description>
- </item>
- <item>
- <title>RSS - A Follow-up</title>
- <link>https://www.senders.io/blog/2022-12-31/</link>
- <guid isPermaLink="true">https://www.senders.io/blog/2022-12-31/index.html</guid>
- <pubDate>Sat, 31 Dec 2022 00:00:00 -0500</pubDate>
- <description>
- <![CDATA[
- <article>
- <h1>RSS - A Follow-up</h1>
- <p>Get an RSS reader and connect everything to it!</p>
- <p>Between switching to Mastodon for my social media allowance, and using
- a dedicated RSS reader has really cut down my overall consumption and
- wasted PC time.</p>
- <blockquote>
- <p>this blogpost is originally posted to my gemini gemlog:
- gemini://senders.io/gemlog/2022-12-31-rss-a-follow-up.gmi which is
- where I do most of my writing, converting some useful to share things
- over here. It is also where the original RSS gemlog this is a follow-up
- to was posted. For context, I wanted to cutback on a lot of my web
- consumption, wasting time and just being mindless online. So I looked
- to RSS to help centralize and solve this issue.</p>
- </blockquote>
- <h2>Recap</h2>
- <p>So I am using <a rel="external noopener noreferrer"
- target="_blank"
- href="https://tt-rss.org">https://tt-rss.org/</a> as my RSS
- aggregator. It’s a self-hosted RSS aggregator that, using profiles,
- allows you to subscribe to multiple feeds and have them “synced”
- between multiple devices (they’re not synced, you’re connecting to a
- central server). I like this because I don’t ever have to worry about
- dismissing, reading, or marking anything on my phone to have it still
- present on my PC. And I don’t have to worry about feed subscriptions
- or my phone pinging a bunch of feeds, or obviously, any third-party
- hosting.</p>
- <h2>How I’ve been using it</h2>
- <p>So as always, please send me interesting RSS feeds! Or even your own!
- I am trying to read more blogs, and if you have something you enjoy drop
- me a DM or email! I’ll share what I am following throughout this section
- &lt;3</p>
- <h3>Blogs</h3>
- <p>Obviously, I am following blogs, one of the last holdouts of RSS. I
- have a few that I follow, mostly other transfolk on Mastodon that I found
- had their own blogs. Most non-trans folks I follow are using gemini and
- still rely on the feed aggregators for that.</p>
- <p>If you’re interested the two main ones I am reading right now are:</p>
- <ol>
- <li>
- <a rel="external noopener noreferrer"
- target="_blank"
- href="https://erininthemorn.substack.com">Erin In The Morn
- (substack)</a>
- </li>
- <li>
- <a rel="external noopener noreferrer"
- target="_blank"
- href="https://www.selfawaresoup.com/">Selfaware Soup</a>
- </li>
- </ol>
- <p>Which have been pretty insightful. Erin sharing a lot of US
- transgender news, which is good since I have dropped off using Reddit
- which is where I “got” my “news” from.</p>
- <h3>Podcasts</h3>
- <p>The other mainstay in RSS is podcasts. Some even say if a podcast
- can’t be consumed via RSS, is it even a podcast? I would agree.
- Everything else is just a show. I don’t <em>need</em> the content to be
- consumable from my reader, but I’d really appreciate it if were. I am
- always on the lookout for more podcasts though. With the only two
- consistent listens being:</p>
- <ol>
- <li>
- <a rel="external noopener noreferrer"
- target="_blank"
- href="https://www.relay.fm/penaddict">The Pen Addict Podcast
- (relay.fm)</a>
- </li>
- <li>
- <a rel="external noopener noreferrer"
- target="_blank"
- href="https://www.relay.fm/cortex">Cortex Podcast (relay.fm)</a>
- </li>
- </ol>
- <p>And currently off-season:</p>
- <ul>
- <li>
- <a rel="external noopener noreferrer"
- target="_blank"
- href="https://www.relay.fm/backmarkers">Backmarkers Podcast
- (relay.fm)</a>
- </li>
- </ul>
- <p>Which has a YouTube video format. Though, I honestly really don’t care
- for Austin Evans, I just enjoy consuming some F1 content and pretending I
- have friends I can talk to about motor racing.</p>
- <p>While writing this section I added:</p>
- <ul>
- <li>
- <a rel="external noopener noreferrer"
- target="_blank"
- href="https://inside.java/podcast/">Inside.java Podcast</a>
- </li>
- </ul>
- <p>I have yet to listen, some of the topics seem interesting and being
- infrequent gives me hope its quality over quantity. (And I like having
- podcasts for chores to distract my brain)</p>
- <h3>Tech News</h3>
- <p>Right now I follow two main news sources in tech:</p>
- <ol>
- <li>
- <a rel="external noopener noreferrer"
- target="_blank"
- href="https://www.debian.org/News/">debian.org/news</a>
- </li>
- <li>
- <a rel="external noopener noreferrer"
- target="_blank"
- href="https://lwn.net/">LWN.net</a>
- </li>
- </ol>
- <p>Running servers using stable debian - it’s good to know when security
- updates come in, as well as distro updates. And LWN is fantastic, I’ve
- been a subscriber for many years and while sometimes (Jake) can focus a
- bit heavy on Python news, has been always interesting to read.</p>
- <p>This is the section I plan on adding more and more to. I had other
- tech blogs that just felt like clutter and were pushing out daily
- articles that I couldn’t care less about (opensource.com cough cough).
- But that’s just me. Tech news is mainly where I want to focus - since
- fluff blogs are rarely my cup of tea.</p>
- <p>LWN has some links in their weekly editions for other news feeds I
- might consider directly subscribing too, but for now I have these.</p>
- <h3>Music News</h3>
- <p>Some folk have an RSS feed for their site updates, which I appreciate.
- Some use sites like Squarespace but don’t properly connect up the RSS
- feed which I do NOT appreciate.</p>
- <p>So right now I have two bandsites that DO update it seems (as their
- site aligns with the feed) - but the only one I’ll mention is: <a rel=
- "external noopener noreferrer"
- target="_blank"
- href="https://raisedbyswans.com/">raisedbyswans.com</a> I’ve spoken of
- this artist in my Music Spotlight MANY times and is one of my
- favorites. His site, while entirely simple, is setup with RSS and has
- been publishing his updates consistently. I appreciate this. Always a
- strong rec from me!</p>
- <p>I’ve been toying with Music Review sites that talk about new releases
- in the genres they specialize in, but I haven’t settled on anything that
- is helping me discover new music.</p>
- <h3>YouTube</h3>
- <p>This is probably where the biggest change has actually come in. Having
- my YouTube feed fed through RSS has been fantastic. I am able to not only
- refresh and not miss any updates (since YouTube sometimes likes to pull
- updates in out of order than I don’t see it because it’s buried between
- some other videos that I’d already seen.</p>
- <p>But this also allows me one further level of filtering on my YouTube
- subscriptions. I can stay subscribed to channels I am interested in
- watching <em>occasionally</em> but not every video, and keep those off my
- RSS feed. And for the “I like to watch most if not all the new videos” I
- can subscribe to those via RSS. So it’s like the “bell” but without the
- app basically. And since on Mobile I do NOT use the YouTube app (so I can
- take advantage of the Ad Blocker in Firefox) that’s great!</p>
- <p>What sucks / is tricky is actually subscribing to the RSS feeds
- because YouTube buried that feature now. You just need the channel_id or
- the username and you can subscribe using the following URL:</p>
- <pre><code>https://www.youtube.com/feeds/videos.xml?channel_id={ID}
-</code></pre>
- <p>And you can obtain the channel_id either using the URL (though with
- aliases now (@channelname) its rare to see a channel_id in the URL) if
- present otherwise a little console JS can print it out:</p>
- <pre><code>ytInitialData.metadata.channelMetadataRenderer.externalId
-</code></pre>
- <p>A note however - you’ll need to clear the console if you navigate to
- the next channel, at least in Firefox, it caches the result otherwise and
- you’ll print out the duplicate value. There are some tools where you can
- print your subscribers list into these feed URLs and bulk subscribe. I’ve
- lost the link (and it’s what I did initially) but I recommend doing the
- manual add at least to focus on the channels you WANT in RSS, since you
- can always fallback to the main subscriptions page on YouTube.</p>
- <p>But what this has given me is the ability to effectively ignore
- YouTube almost entirely. Ideally, I’d script something with YouTube-dl
- but I don’t REALLY care that much, and I’ve gotten into the habit of
- closing the tab after the video so I don’t stick around and get sucked
- into the algorithm.</p>
- <p>What my morning looks like is sitting down, switching to my tt-rss
- tab, seeing what’s fresh, and watching a video with my coffee maybe, then
- just moving on and doing something else. I still lurk Mastodon, or get
- sucked into my computer in some way or another, but it’s been really
- positive! I can count on one hand how many times since dedicating to RSS
- I’ve just clicked around YouTube.</p>
- <h3>Hobby</h3>
- <p>The last section which really is an extension of Blogs/News is “hobby”
- RSS feeds. These feed a bit into the consumerist side of life and why I
- keep them separate. Right now it’s almost <em>entirely</em> fountain pen
- related (Who&#39;da thought this community would still be writing blogs
- :P) but since most of the blog posts are either about products or reviews
- in some way, I try and limit how much I expose myself to them. I have
- been working on a draft about consumerism for quite a while now and just
- haven’t really worked it into a post that isn’t just DAE consumerism BAD?
- low-effort Toot level. (But basically, I kinda hate how all my hobbies,
- and hobbies in general rely heavily on a consumerism mindset, GAS, and
- such). So I’ve been trying to be more appreciative of what I already have
- and such.</p>
- <p>But these blogs are nice, and often keep in the know about my hobbies
- and can react to anything meaningful that’s being released. A good video
- sorta on this topic was by Adam Neely(<a rel=
- "external noopener noreferrer"
- target="_blank"
- href="https://www.youtube.com/v/mHoljbkyAEs">Adam Neely - How In-Ear
- Monitors are Making Better Musicians</a>), and how his band spend
- $6000 on gear for their tour, but what it did was eliminate stress and
- enable them to more easily fine tune and control how they monitor
- their live performance. He touches on the fact that gear videos feed
- into the consumerist mindset of music making, but gear is often
- necessary to facilitate certain things, and setting up a portable
- in-ear-monitor rig for their entire band is well… unavoidable. It’s
- just a minor aside in a much deeper video about IEMs and touring and
- FEEL. And quite the departure from his usual music education content.
- But it sums up the main thesis of my consumerism gemlog quite nicely I
- feel (or at least I am projecting my thoughts into a brief aside he
- makes).</p>
- <h2>tt-rss - in retrospect</h2>
- <p>So tt-rss is <em>fine</em> honestly, I think I need to setup a better
- theme, something that has a bit more contrast. I don’t REALLY read in it,
- I just use it as the aggregator and then open the links directly. I don’t
- mind the way it renders the full articles with images, but I do mind how
- GREY it is by default (in “night” theme). It looks totally customizable
- and I bet I can download a decent theme for it if I look. But I may spend
- some time doing that and try and read more in application.</p>
- <p>But other than that it’s been quite the improvement over my internet
- experience. More RSS!!</p>
- <h2>Conclusion</h2>
- <p>I need more feeds, as I do enjoy reading. So I’m always on the look
- out. I hate to throw in engagement-y things like “let me know” stuff but
- I am genuinely looking for interesting suggestions for stuff you might
- subscribe to over RSS. Even if it’s just “this is my webblog” :) I always
- like reading people’s things. I should troll the aggregators and look at
- folks capsule landings to see what is linked!</p>
- <p>Anyway, you should look into getting an RSS aggregator setup. It’s
- been really impactful on cutting down on internet scrolling and
- mindlessness.</p>
- </article>
- ]]>
- </description>
- </item>
- <item>
- <title>CSS Themes Exist Now!?</title>
- <link>https://www.senders.io/blog/2022-12-05/</link>
- <guid isPermaLink="true">https://www.senders.io/blog/2022-12-05/index.html</guid>
- <pubDate>Mon, 05 Dec 2022 00:00:00 -0500</pubDate>
- <description>
- <![CDATA[
- <article>
- <h2>CSS Themes Exist Now!?</h2>
- <p>Yeah news to me too! Seems like according to <a rel=
- "external noopener noreferrer"
- target="_blank"
- href=
- "https://developer.mozilla.org/en-US/docs/Web/CSS/@media/prefers-color-scheme#browser_compatibility">
- the MDN</a> it’s been supported since 2019 for most browsers and
- supported by all by now.</p>
- <p>This is so wild!</p>
- <h3>Why is this cool?</h3>
- <p>Well you may have noticed this is in dark mode now (if you set your
- preferences to dark in your OS/Browser). But this is cool because it
- means we’re no longer restricted to using Javascript and custom
- preferences for websites.</p>
- <p>I had assumed this existed because sites like GitHub were defaulting
- to darkmode despite me never setting anything in like my profile
- settings. But I just assumed based off of my legacy knowledge this was
- some custom render trick using javascript.</p>
- <h4>Still no JS!</h4>
- <p>I keep this blog JS free! While not all pages under the senders.io
- umbrella are javascript free - everything in www.senders.io (this blog)
- will always be.</p>
- <p>I try to keep that, not only for my sake, but for your sake too - a
- javascript free blog means the priority is reading.</p>
- <h3>Examples</h3>
- <p>So I achieve darkmode in this blog by doing the following:</p>
- <pre><code>/* default / light */
-:root {
- --background: white;
- --font: black;
- --quote: #eee;
- --link: #0303ee;
- --linkv: #551a8b;
- --linkf: #f02727;
- --articleborder: #060606;
- --tableborder: #aaa;
- --tablehead: #ebcfff;
- --tablez: #eee;
-}
-@media (prefers-color-scheme: dark) {
- :root {
- --background: #1e1e1e;
- --font: #eee;
- --quote: #444;
- --link: #00d3d3;
- --linkv: #cd78f4;
- --linkf: #f02727;
- --articleborder: #23ed9b;
- --tableborder: #aaa;
- --tablehead: #6f5a7e;
- --tablez: #313131;
- }
-}
-</code></pre>
- <p>Essentially, I leverage <a rel="external noopener noreferrer"
- target="_blank"
- href=
- "https://developer.mozilla.org/en-US/docs/Web/CSS/Using_CSS_custom_properties">
- CSS Variables</a> to define the specific areas I set theme specific
- colors (my nav bar is static regardless of dark/light mode for
- example).</p>
- <p>Then if the media preference is dark - I overwrite the variables with
- my dark mode values!</p>
- <p>Whats tricky is originally most of these values didn’t actually HAVE
- values set - I relied on the system default for things like links and the
- page colors in an effort to use minimum CSS as well.</p>
- <p>I still feel like I am honoring that since I don’t have to duplicate
- any actual CSS this way, I just have a lookup table of color values.</p>
- <p>That being said my CSS file is still only about 3kB which is not so
- bad. And I’ve actually covered most themed properties already - links,
- tables, quotes.</p>
- <h4>Toggling Themes</h4>
- <p>Something else I found out during this experiment is you can actually
- toggle the themes directly in your developer tooling. By opening your
- devtools and going to Inspector (in firefox at least) there are two
- buttons in the styles section “toggle light color scheme” and “toggle
- dark color scheme” using a sun and moon icon.</p>
- <p>This made testing VERY easy and actually is what I noticed to prompt
- me into looking up if this was a standard CSS thing or not. So thanks
- Mozilla!</p>
- <h3>Conclusion</h3>
- <p>Yeah if you’ve never realized this check out the MDN guides on both
- variables (I didn’t realize these got put in the standard either!) and
- themes!</p>
- <ul>
- <li>CSS Variables: <a rel="external noopener noreferrer"
- target="_blank"
- href=
- "https://developer.mozilla.org/en-US/docs/Web/CSS/Using_CSS_custom_properties">
- https://developer.mozilla.org/en-US/docs/Web/CSS/Using_CSS_custom_properties</a>
- </li>
- <li>CSS Media prefers-color-scheme: <a rel=
- "external noopener noreferrer"
- target="_blank"
- href=
- "https://developer.mozilla.org/en-US/docs/Web/CSS/@media/prefers-color-scheme">
- https://developer.mozilla.org/en-US/docs/Web/CSS/@media/prefers-color-scheme</a>
- </li>
- </ul>
- </article>
- ]]>
- </description>
- </item>
- <item>
- <title>My Markdown -> HTML Setup</title>
- <link>https://www.senders.io/blog/2022-11-06/</link>
- <guid isPermaLink="true">https://www.senders.io/blog/2022-11-06/index.html</guid>
- <pubDate>Sun, 06 Nov 2022 00:00:00 -0400</pubDate>
- <description>
- <![CDATA[
- <article>
- <h2>My Markdown -&gt; HTML Setup</h2>
- <p>A common way I see a lot of people blog, especially micro-blog, is in
- <a rel="external noopener noreferrer"
- target="_blank"
- href="https://daringfireball.net/projects/markdown/">markdown</a>.</p>
- <figure>
- <blockquote>
- <p>Markdown is a lightweight markup language for creating formatted
- text using a plain-text editor.</p>
- </blockquote>
- <figcaption>
- <cite>— <a rel="external noopener noreferrer"
- target="_blank"
- href="https://en.wikipedia.org/wiki/Markdown">Wikipedia |
- Markdown</a></cite>
- </figcaption>
- </figure>
- <p>It built itself on-top of common syntax prevalent on the web and was
- designed to be converted into simple HTML output. Since it leveraged
- preexisting syntax it was easy for new users to pick up, and is now found
- all over the web and applications.</p>
- <p>Since I started this website, I had been writing each page by hand
- using a few tools to facilitate that - and for a while I had been looking
- for a good way to try out using markdown to generate some lighter pages
- and these blogposts.</p>
- <h3>Writing HTML by hand</h3>
- <p>When it comes to blogging a lot of platforms offer WYSIWYG editor –
- allowing users to write in rich-text that then gets converted into HTML
- in the style of the platform. But for my case, since I self host this
- website, I decided to stick to my roots and write PURE HTML instead.</p>
- <p>HTML is fairly simple and easy once you get use to the basic structure
- of the system. And since I’ve been working in HTML almost two decades
- now, at the time it felt like the best solution to make a clean
- website.</p>
- <p>I briefly touched on my design process in <a href=
- "/blog/2019-01-21/">2019-01-21 - First! A New Years Resolution</a>
- outlining that I wanted to make a very lightweight and simple website.
- And at the time I believed the best way to achieve this goal was to
- carefully structure and craft my website’s HTML by hand.</p>
- <p>This article is making the process sound far more difficult than it is
- – it’s mostly just tedious.</p>
- <pre><code>&lt;article&gt;
-&lt;h2&gt; Title &lt;/h2&gt;
-&lt;p&gt;
- Some paragraph....
-&lt;/p&gt;
-&lt;h3&gt;
-&lt;p&gt; some subsection &lt;/p&gt;
-&lt;/h3&gt;
-&lt;p&gt; more text &lt;/p&gt;
-... etc
-</code></pre>
- <p>Is essentially what the website looks like - you can view the source
- of this page to see – it’s very simple HTML.</p>
- <p>The benefit I found doing this, mostly leveraging <a href=
- "www.html-tidy.org/">tidy</a>, allowed a very easy to edit codebase. And
- by leveraging the existing tags and their properties I also attempted to
- keep the styling to an absolute minimum. Using existing tags to enforce
- the styling I desired.</p>
- <p>Only for certain areas (tables, code, quotes) where readability is an
- issue do I setup custom CSS.</p>
- <p>Most of this process is actually what will continue to happen but the
- actual writing process will be unobstructed by the tedium of writing
- HTML.</p>
- <h3>Micro-blogging in general</h3>
- <p>At the time of writing this, I have no ported over any of my <a rel=
- "external noopener noreferrer"
- target="_blank"
- href="https://gemini.circumlunar.space/">Gemini</a> micro-blogs. This
- warrants a longer post, since I wrote consistently in gemini from
- March 2021 through May 2021 – having only stopped due to a long move
- leading to a lot of server downtime breaking the habit. My gemini
- updated multiple days a week - mostly due to the extremely lightweight
- and limited nature of the platform.</p>
- <h4>Gemtext</h4>
- <p><a rel="external noopener noreferrer"
- target="_blank"
- href="https://gemini.circumlunar.space/docs/gemtext.gmi">Gemtext</a>
- was the gemini protocol’s standard MIME type. It was a basic markup
- language that relied on line based syntax. It was purposefully as lean
- as necessary because this was what was ACTUALLY being served to
- clients – unlike Markdown which first needed to be converted to HTML,
- gemtext was the actual text served and rendered on the viewers client.
- You could customize the style of your client - but you could not, as
- an author, dictate how your content would be viewed. This meant the
- only aspects of your blog you had control over was the actual content
- and it’s structure – which for a blog is really all you should care
- about.</p>
- <p>It’s syntax contained most of what I was actually using here already
- from HTML:</p>
- <ol>
- <li>headings</li>
- <li>paragraphs that were wrapped based on page-width</li>
- <li>links</li>
- <li>lists</li>
- <li>quotes</li>
- <li>preformatted-text / codeblocks</li>
- </ol>
- <p>Besides links - it also leveraged the same common syntaxes that
- markdown did.</p>
- <h4>Gemtext links</h4>
- <p>From my brief time in the IRC and in geminispace in general - a lot of
- the “recommendations” came from new users about providing in-line links.
- The philosophy was that by forcing links to exist on their own line -
- clients could configure how they wanted these to be seen and not have to
- worry about links interfering with the text.</p>
- <figure>
- <blockquote>
- <p>Like Gopher (and unlike Markdown or HTML), Gemtext only lets you
- put links to other documents on a line of their own. You can’t make a
- single word in the middle of a sentence into a link. This takes a
- little getting used to, but it means that links are extremely easy to
- find, and clients can style them differently (e.g. to make it clear
- which protocol they use, or to display the domain name to help users
- decide whether they want to follow them or not) without interfering
- with the readability of your actual textual content.</p>
- </blockquote>
- <figcaption>
- — <cite><a rel="external noopener noreferrer"
- target="_blank"
- href=
- "https://gemini.circumlunar.space/docs/gemtext.gmi">gemini.circumlunar.space
- – A quick introduction to “gemtext” markup | Links</a></cite>
- </figcaption>
- </figure>
- <p>I felt that this provided a lot of useful limitations that removed a
- huge barrier for me to actually write down ideas without feeling over
- burdened. I also lurked in the IRC - as well as <a rel=
- "external noopener noreferrer"
- target="_blank"
- href="https://github.com/s3nd3r5/java-gemini-server">implemented my
- own gemini server</a>.</p>
- <p>As a quick aside – the java server was a lot of fun! The protocol was
- very simple to work with for basic gemtext. I felt the ultimate downside
- was trying to build something for basic gemini capsule hosting (like I
- was using for a decent chunk of my time with gemini) - and something for
- developers to use as a base application server. At the time in 2021 a lot
- of talk was happening on IRC of users starting to look to provide more
- complex experiences via the protocol and I wanted a way for those
- interactions to be built out in Java - since most were in Go or Python at
- the time. This decision lead to me burning out due to difficulties
- splitting those responsiblities easily - where you could host along side
- your application - since I lacked the experience with more complex Gemini
- capsule applications.</p>
- <p>But it was a good experience and I got hands on experience with Certs,
- Netty, and SNI - which actually came in handy at my job!</p>
- <h3>Wasn’t this about Markdown?</h3>
- <p>A lot of what I liked about Gemini I found missing when I returned to
- the World Wide Web. Writing a new post was tedious and I actually had a
- few drafts sitting unposted. They’re probably checked into my git at this
- moment! So I thought - why not just use markdown and convert to HTML?
- That’s what it’s built for - and I already designed my site to work with
- minimal customization of raw HTML tags!</p>
- <h3>How I use Markdown</h3>
- <p>Firstly, this blogpost was written in Markdown (with minimal HTML
- sprinkled in). Then I render the markdown into HTML using <a rel=
- "external noopener noreferrer"
- target="_blank"
- href=
- "https://www.pell.portland.or.us/~orc/Code/discount/">Discount</a>.
- Frankly, I don’t know how I stumbled across this markdown parser - I
- think it came pre-installed on my KDE Arch system because another KDE
- program used it. But I liked it, and it seemed extensible enough for
- my needs.</p>
- <p>This would produce the “body” of my articles - and I could then
- prepend and append the template-head and foot to my html output to form a
- blog post/web page.</p>
- <h4>Customizations</h4>
- <p>After I generated the output file, I replaced some placeholders in the
- templates via <code>sed</code> and then <code>tidy</code>’d the HTML. The
- only other major issue was Discount had no way of appending any link
- attributes – so for external links I had <code>sed</code> append the
- <code>rel</code> and <code>target</code> attributes - which work off the
- assumption they’re not there. A lot of my home-server scripts rely on
- assumptions…</p>
- <p>This is all bundled up in a simple script file so I can just supply a
- few arguments and the full page is re-rendered on command.</p>
- <h3>Two Sources of Truth</h3>
- <p>In the sytem I devised the markdown files are really the “source of
- truth” but you could argue that the HTML files hold equal weigh - as
- they’re what you’re reading right now. The markdown is only useful if I
- render it as HTML. There exist nginx extensions to serve markdown as HTML
- so I store everything as markdown. I could also provide some heading
- information to the markdowns to remove the command arguments and have on
- boot it generate the .html files in place before launching the site… But
- these are all nice ideas for a later date.</p>
- <p>Ultimately, this is something I contribute to ocassionally - I don’t
- need something too complicated. I just need to output some HTML a few
- times a year. So if I manually publish the HTML each time - that’s likely
- far more efficent then re-rendering.</p>
- <h3>Learnings</h3>
- <p>This is the first post that uses this - though I’ve converted a page
- over to this already. But once I worked out the kinks and built a flow
- that works for me - this made the writing process a LOT easier. Another
- issue was that once I <code>tidy</code>’d the HTML file - it became
- frustrating to edit, and I didn’t always re-tidy it. Because the output
- is always <code>tidy</code>’d by the script - I can edit the raw markdown
- as needed. And the script generally will always output the same file
- (with whatever changes I made of course). This makes the editing and git
- history a lot clearer.</p>
- <p>I would recommend writing in markdown - or even trying out gemini -
- you can host your gemini capsule on the web even! (Most gemini webpages
- are gemini capsules converted). I am sure other “blog focused markups”
- also exist too.</p>
- </article>
- ]]>
- </description>
- </item>
- <item>
- <title>Manjaro Followup - Breaking things!</title>
- <link>https://www.senders.io/blog/2021-01-05/</link>
- <guid isPermaLink="true">https://www.senders.io/blog/2021-01-05/index.html</guid>
- <pubDate>Tue, 05 Jan 2021 00:00:00 -0500</pubDate>
- <description>
- <![CDATA[
- <article>
- <h2>Manjaro Follow-up - Breaking things!</h2>
- <p>I wanted to write a quick follow-up covering how I managed to break,
- and then recover, everything when I went to remove my old debian
- partition.</p>
- <h3>Recap</h3>
- <p>To recap: I installed Manjaro alongside a Debian/sid and Windows 10
- install. Each of those OSs were on their own SSDs. I went from a 128SSD
- with Windows installed, to adding a 256 installing Debian. Years later I
- split the Debian SSD into two parts - installing Manjaro on my new slice.
- Since my last update I have been playing around with Manjaro and having
- made my i3 keybindings for Kwin I&#39;ve been pretty happy. But then I
- started breaking things.</p>
- <h3>Break stuff</h3>
- <p>I broke my Manjaro by updating my Debian (apparently). To be honest
- this is the one part I don&#39;t fully understand <i>why</i> it happened.
- From what I could find online I didn&#39;t setup my system to handle two
- separate Linux OS installs. But I was no longer able to boot directly
- into Manjaro without using the initramfs failover boot option. I only
- updated my Debian install because I was debugging something on my work
- install, which both run Debian/sid. (Otherwise I would&#39;ve used my
- server which runs Debian/Stable). But considering I hadn&#39;t had any
- need to boot back into Debian I decided to just get rid of it!</p>
- <h3>GParted, Grub, Gotchas!</h3>
- <p>I went in knowing I&#39;d have to fix my Grub since I&#39;d be
- removing Debian, which was the OS that I configured when I first
- dualbooted the machine, so I assumed they were linked somehow and I would
- need to reinstall it. The process I followed was:</p>
- <ul>
- <li>Create a GParted Live USB</li>
- <li>Launch GParted reconfigure my partitions</li>
- <li>Open the terminal in the live USB and reinstall Grub</li>
- </ul>The 3rd point being a bit of a &quot;rest of the owl&quot; I
- wasn&#39;t sure what to expect. GParted thankfully warns you
- &quot;you&#39;re probably going to break stuff see our FAQ&quot; which
- had a section on reinstalling grub. Reading that the 3rd part became:
- <ul>
- <li>mount the linux OS</li>
- <li>bind the live dirs that are needed: <code class='inline'>/dir /sys
- /proc</code></li>
- <li>chroot into the mounted folder</li>
- <li>run <code class='inline'>grub-install &lt;device&gt;</code></li>
- </ul>But what I failed to realize (stupidly in hindsight) was the
- &quot;device&quot; is the Master Boot Record (MBR) device. So in my case
- Windows or <code class="inline">/dev/sdb</code>. I had assumed it was the
- device of the linux install so I tried that and got notified my EFI boot
- directory didn&#39;t look like an EFI partition... and from here it was
- rabbit holes.
- <h3>Where is my EFI partition?</h3>
- <p>I have a fairly old Windows 7 install that has been upgraded to
- Windows 10 during this whole journey. I&#39;ve been meaning to reinstall
- it (on a larger drive). But rather than having a few partitions on my
- drive (typically having a boot partition) I just have the one (and a
- recovery partition). Its marked as boot, and even mounted to <code class=
- 'inline'>/boot/efi</code> I found when I was able to boot into Manjaro
- again. But it made no sense to me. If I needed an EFI partition, why was
- my efi pointed to the root of my Windows C drive? The rabbit hole
- consisted of:</p>
- <ul>
- <li>Creating a 200MB Fat32 Boot partition</li>
- <li>Mounting that as my efi-directory</li>
- <li>Reinstalling grub (again on my Linux device)</li>
- <li>Eventually getting it to boot straight into Manjaro</li>
- <li>Modifying my <code class='inline'>/etc/fstab</code> to mount my
- boot/efi to the new partition (oops)</li>
- <li>Repeating the above steps 5 times hoping something would be
- different</li>
- <li>Eventually finding in a forum that grub should be on the
- MBR...</li>
- </ul>
- <h3>The Fix and Final Steps</h3>
- <p>The fix was to basically follow the steps above but use the MBR:</p>
- <ul>
- <li>Boot GParted Live USB</li>
- <li>Properly configure any partitions (this case delete the
- &quot;EFI&quot; partition)</li>
- <li>Mount the linux device</li>
- <li>Bind the necessary live dirs to the linux mount</li>
- <li>Run grub-install to the MBR device</li>
- <li>Reboot</li>
- </ul>It was that misunderstanding about the MBR that sent me on a path,
- but now I at least feel semi-confident in changing around my OSs knowing
- how to fix Grub. But what bout the Fstab?
- <p>Like all true movie monsters, my stupidity came back for the final
- scare. I booted into Manjaro, from Grub! to have it crash on me. It
- couldn&#39;t mount one of the devices! The deleted partition! I was in
- the recover shell and was able to modify the Fstab to point back to the
- correct boot/efi device. (Thankfully I was familiar with Fstab to begin
- with). But editing two files in a super-low-res terminal is not my idea
- of fun (okay, maybe it is).</p>
- <h3>Conclusion</h3>
- <p>One of my new years resolutions was to learn more about my system. So
- lighting a fire I had to put out was a great way to get some more
- knowledge on maintence for grub/dualbooting.</p>
- </article>
- ]]>
- </description>
- </item>
- <item>
- <title>Manjaro Experiment</title>
- <link>https://www.senders.io/blog/2020-12-17/</link>
- <guid isPermaLink="true">https://www.senders.io/blog/2020-12-17/index.html</guid>
- <pubDate>Thu, 17 Dec 2020 00:00:00 -0500</pubDate>
- <description>
- <![CDATA[
- <article>
- <h2>Manjaro Experiment</h2>
- <p>After years on Debian, running i3, I decided to try out a more
- traditional Linux setup, and take a stab at gaming on Linux. I chose
- Manjaro for a few reasons:</p>
- <ul>
- <li>It&#39;s not Debian based (it&#39;s arch btw /s)</li>
- <li>It&#39;s still on Systemd so I won&#39;t lose that familiarity</li>
- <li>For gaming it comes with pretty up to date drivers and setup for
- running Steam games</li>
- <li>It has a KDE installation which is what I wanted to run</li>
- </ul>
- <h3>Why &quot;not Debian&quot;</h3>
- <p>Debian is home for me. I have used it for years on both work machines,
- servers, personal desktop. But it comes with its own quirks. Starters - I
- am running base Debian, not a Debian based system, which generally means
- some packages are out of date. To get around this I run Sid/Unstable.
- This hasn&#39;t been a particular issue, but sometimes there are version
- conflicts and other just nuisances and no real <i>easy</i> way to get
- every package in the proper version configuration. This was a particular
- pain-point with getting Steam (nonfree too which adds another layer of
- configurations) Wine and a few other packages all set up. Plus
- 32-bit!</p>
- <h4>i3</h4>
- <p>I have been using i3 as my window manager and without really any other
- desktop environment programs. My login is the typical tty debian login.
- But running i3 and then having windows appear, especially game windows
- which can be tempermental, getting tiled to have to break it out again is
- just a hassle. While I could&#39;ve gone with another Debian base running
- a proper desktop environment + window manager I figured that&#39;d be
- boring and I&#39;d just be trying out the programs and not the Linux,
- which is half the fun.</p>
- <p>That being said. i3 <i>is</i> Linux for me. Being able to just move
- between windows with a macro and every bit of it just being intutive
- (after you&#39;ve learned!) is a productivity booster. Which is why I
- still use it on my work machine, and can&#39;t see myself ever switching
- off.</p>
- <h3>KDE</h3>
- <p>I&#39;ve used Gnome and XFCE as desktop environments before, and
- they&#39;re fine, but I&#39;ve always like the customability,
- flexibility, and polished look of KDE.</p>
- <h4>Setting up KDE for an i3 addict</h4>
- <p>By default KDE isn&#39;t really too hard to &quot;get used to&quot;
- since it feels like any other OS, especially a windows setup. But the
- main thing I needed to change is the <code class=
- 'inline'>meta+&lt;key&gt;</code> commands.</p>
- <ul>
- <li>Remapping the Virtual Desktop changes</li>
- <li>Remapping the KWin window focuses</li>
- <li>Remapping the KWin move to desktop</li>
- <li>Installing DMenu</li>
- <li>Shrinking the &quot;start bar&quot; panel</li>
- <li>Removing Pager</li>
- <li>Changing Task Manger to Window List</li>
- <li>Configuring Desktop Layout to &quot;Desktop&quot; (this removes the
- icons)</li>
- </ul>Doing this helped make me feel at home so far, and not have to
- retrain my brain.
- <h4>Some of the key remappings</h4>
- <p>Setting up the KWin window keymapping was really what made me feel at
- home. For the first few hours with it, I felt as limited in my
- productivity as with Windows. KDE and Windows share by default a lot of
- the same keymappings around window manipulation and virtual desktop
- changes. <b>Switch to desktop N</b> setting this as <code class=
- 'inline'>meta+&lt;N&gt;</code> where N is the dekstop 1-10 (0). <b>Switch
- to Window to the Left/Right/Up/Down</b> This was one I was nervous
- wouldn&#39;t exist as a keybind. But What was <code class=
- 'inline'>meta+alt+&lt;dir&gt;</code> was mapped to without the alt. This
- allowed for the very annoying lack of ability to just jump between
- browser and terminal, or especially two separate terminals. <b>Quit
- Window</b> with <code class='inline'>meta+shift+Q</code>, <b>Tile
- Window</b> command to use the Shift key rather, especially as
- <code class='inline'>meta+&lt;dir&gt;</code> was overwritten by the focus
- switching.</p>
- <h3>Manjaro</h3>
- <p>So I went with KDE Manjaro. Manjaro aims for the gaming desktop
- experience. Arch is new for me, so I feel that would be something to
- adjust to and learn.</p>
- <h2>Gaming</h2>
- <p>It has only been a day with it as I am writing. But I was able to get
- a fair amount of the fighting games I wanted to play work.</p>
- <h3>Proton + Steam</h3>
- <p>So far my main focus has been running the fighting games I noodle
- around on in Steam. To do this I launched Steam and installed the proton
- and setup to run all games, regardless of compatibility. None of the
- games I hoped to run had worked this way. I then opt&#39;d into the beta
- for Proton running the experimental builds, which should generally have
- the more up-to-date tunings for games. With this setup I was able to get
- Soulcalibur VI to work. Battle for the Grid and Dragon Ball FighterZ both
- had launching issues. So I looked around and found <a href=
- "https://github.com/GloriousEggroll/proton-ge-custom/">Proton Ge
- Custom</a> which is a custom fork of Proton that contains custom settings
- and tweeks for various games. One of which is Battle For the Grid which
- is how I found it. Using this I was able to play every game except Dragon
- Ball FighterZ! A callout for Dead or Alive 6 which is performing
- questionably. It can run and isn&#39;t actually too bad, but in windowed
- or borderless it stutters and drops frames.</p>
- <h4>Other issues</h4>
- <p>Even on Windows there are issues with some games and your standard
- configurations. Disabling Steam Overlay and adjusting the Steam Input
- Setting on some games helped get some games working.</p>
- <h3>Conclusion</h3>
- <p>Gaming on Linux is still not great. Its MILES ahead of where it was
- even a few years ago when I setup this PC. And I think it will take some
- adjustment getting a feel for an i3less workflow.</p>
- <h2>Update!</h2>
- <h3>NTFS mounting</h3>
- <p>Update! I got DOA and a few other games to run a bit smoother by
- remounting my NTFS drives properly. I ended up using the following for my
- /etc/fstab configuraiton for my NTFS drives: <code>UUID=&lt;drive-id&gt;
- /mount/path ntfs
- uid=1000,gid=1000,rw,user,exec,async,locale=en_US.utf8,umask=000 0
- 0</code> I had noticed that both steam and mount.ntfs was running at
- 20-40% CPU while not really doing anything. And then upwards of 80%
- during gameplay.</p>
- <h3>i3 Compatibility</h3>
- <p>As I spend more time using the OS I made a few more adjustments:</p>
- <ul>
- <li>Removed everything except the Clock and System Tray.</li>
- <li>I added KRunner to <code class='inline'>meta+space</code> to ease
- running KDE specific programs that I can&#39;t be bothered to memorize
- the name of</li>
- <li>Back and forth on forcing &quot;No border&quot; on all windows.
- Part of the reason I moved away from i3 was so that I had better
- floating window management. And doing this would basically put me in an
- equally hard to manage system for floating game windows. So until I
- find a plugin that makes small taskbar/borders for the windows I&#39;ll
- be sticking with the default.</li>
- <li>On Manjaro at least: UNINSTALL mesa-demos! <code class=
- 'inline'>sudo pacman -R lib32mesa-demos mesa-demos</code> This package
- had the annoying &quot;fire&quot; demo which made dmenu opening firefox
- a pain in the ass.</li>
- </ul>The biggest difference was removing the Application Launcher from
- the main panel. Having it there really felt like a crutch for running
- programs. It is equal I would say to running apps as dmenu via
- <code class='inline'>meta+d</code> vs just <code class=
- 'inline'>meta</code> to launch the Application Launcher. However, the
- bulky UI of it, even using just Window List, took away from the look/feel
- I was going for.
- </article>
- ]]>
- </description>
- </item>
- <item>
- <title>Bread Blog (First post)</title>
- <link>https://www.senders.io/blog/bread/</link>
- <guid isPermaLink="true">https://www.senders.io/blog/bread/index.html</guid>
- <pubDate>Mon, 17 Feb 2020 00:00:00 -0500</pubDate>
- <description>
- <![CDATA[
- <article>
- <h2>Bread</h2>
- <p>I decided to make a singular dedicated page to my recent bread bakes.
- I am trying to at least keep a log of each bake, what went wrong/right in
- hopes of nailing a recipe that works best for me.</p>
- <h3 id="2020-02-17">February 17, 2020</h3>
- <p>First post! I have done four bakes in 2020 that are worth mentioning.
- Three that ended up rather successful and one lesson learned. Because
- this is my first post its containing three very similar bakes that were
- effectively the same recipe</p>
- <h4>Boules</h4>
- <p>I have made two very good boules in 2020. I first made a pate
- fermentee using the following ratio using 50% of my total flour weight:
- (500g, so 250g).</p>
- <table class="bake-info">
- <caption>
- Pate Fermentee
- </caption>
- <thead>
- <tr>
- <th>Item</th>
- <th>%</th>
- </tr>
- </thead>
- <tbody>
- <tr>
- <td>Flour (Bread)</td>
- <td>100%</td>
- </tr>
- <tr>
- <td>Water (Room temp)</td>
- <td>70%</td>
- </tr>
- <tr>
- <td>Yeast (Instant)</td>
- <td>0.55%</td>
- </tr>
- <tr>
- <td>Salt</td>
- <td>10%</td>
- </tr>
- </tbody>
- </table>To make the pate, I mixed all the dry ingredients together, then
- added the room temperature water. I let that loose mixture rest for 15
- minutes. Once it was rested, I wet my hands and bench (lightly) and
- kneaded for roughly 8 minutes. After kneading I tightened the dough into
- a boule and let it sit in a plastic wrap covered greased bowl for an
- hour. After an hour I placed it into the friged, as is.
- <p>The next day, basically in the AM when I had time to bake I took the
- dough out of the fridge, cut it into smaller bits (four), and let it come
- to room temperature (ish, about an hour). I prepped the same ratio above
- except with warmer water (~108°F). When I added the water to the dry
- ingredients I added the pate along with it. I used the curved edge of my
- scrapper to cut into the pate and incorporate it fully. Once I felt it
- was all one loose mess I let it sit for 15 minutes. After the 15 minutes
- I wet my hands, and bench, and began to knead the dough for 8 minutes.
- After kneading I formed the dough into a boule and placed it into a
- greased bowl covered in plastic wrap. I let that sit on my bench for 90
- minutes or so. After the first proof I dampened my bench and took the
- risen dough out of the bowl and lightly pressed it into a thick circle. I
- then took the, what would be, corners of the mass and folded them into
- the center, rotating after each fold. This process creates a boule shape
- while creating tension. I would continue to do this about 8-10 times
- really until it felt like I couldn&#39;t grab anymore/it wouldn&#39;t
- stick. Then I flipped the dough over and tightened the boule in a
- scooping motion as I rotated it. Then placed it into my floured banneton.
- I let it rise again for about 45 minutes. Around the 30 minute mark I
- would preheat my oven to 500°F. Once the oven was preheated and its been
- at least 45 minutes. I flipped out the dough onto the peel (dusted with
- corn flour) and scored it. I then misted the top with a spray bottle of
- water and slid it onto my baking stone. While preheating the oven I also
- set a kettle to boil some water which I poured into the preheating baking
- sheet on the bottom rack. I set the timer for 10 minutes and every two
- minutes or so I would add more boiling water. After 6 minutes I rotated
- the dough using the peel (careful not to damage it). And misted the
- facing side with the spray bottle (I found the back is lighter so this
- helps make the entire steaming more even). After the turn and mist I add
- twenty minutes to my timer and drop the temperature to 450°F.</p>
- <p>This produces a nice, well risen boule with a golden brown crust.</p>
- <p>I skipped the pate in my most recent bake and just did 100% (500g)
- starting from &quot;day 2&quot;. I also subtituted 100g with AP
- flour.</p>
- <h4>Baguettes</h4>
- <p>I actually did the boule recipe first for my baguettes. I did aiming
- for 1000g flour so my pate was with 500g and a 50/50 AP/Bread mix. I
- screwed up the ratio for yeast and added almost double. The recipe is
- essentially the same with the final steps being the difference.</p>
- <p>After the first proof I sliced the dough into three chunks. Then I
- formed those into boules and let them sit for 5 minutes. After resting I
- then rolled them into batards and let them sit for 10 minutes. After 10
- minutes I then rolled them into baguettes and placed them on the baguette
- sheet. And then baked them. After letting them rise for 45 or so
- minutes.</p>
- <h4>Accidents</h4>
- <p>Baguette rolling is hard. And I need to let the dough rest longer
- between each shape.</p>
- <p>1000g for three ~15 inch baguettes is too much. I would do 750g next
- time.</p>
- <p>Proofing on the sheet is not recommended in the future as the rose
- really well (probably all that extra yeast!) and ended up sticking
- together.</p>
- <p>I broke my oven light with my spray bottle. And I ruined my cast irons
- seasoning usnig that for the boiling water.</p>
- <h4>What to do next time</h4>
- <p>Next french style boule, I want to do a pate again. As I&#39;ve only
- done it for one boule loaf. And I want to try making two loafs from
- it.</p>
- <h2>Resources</h2>
- <p><a target="_blank"
- href="https://bakewithjack.co.uk">Bake With Jack&#39;s Youtube
- Channel</a> really helped me shape up my shaping up. And the core of
- the pate+french bread recipe is based on that from <a target="_blank"
- href=
- "https://www.goodreads.com/book/show/39910.The_Bread_Baker_s_Apprentice">The
- Bread Baker&#39;s Apprentice</a></p>
- </article>
- ]]>
- </description>
- </item>
- <item>
- <title>remember/recall - what could’ve been a command line tool</title>
- <link>https://www.senders.io/blog/2020-01-13/</link>
- <guid isPermaLink="true">https://www.senders.io/blog/2020-01-13/index.html</guid>
- <pubDate>Mon, 13 Jan 2020 00:00:00 -0500</pubDate>
- <description>
- <![CDATA[
- <article>
- <h2>remember/recall - what could&#39;ve been a command line tool</h2>
- <p>During a meeting at work when I realized I often forget useful
- commands. So I had the bright idea to create a command line tool that
- would basically append a file with the command you wanted to remember
- that you could search over later if you wanted to recall a certain
- command. I figured I could it could just be a simple bash script that
- recalls your bash-history and appends it to a file, all things that are
- incredibly easy to do... or so I thought.</p>
- <h3>Look before you leap</h3>
- <p>This article is a reminder to myself to test the core functionality
- first, before decorating your program/script with all those bells and
- whistles. While I did learn a lot in the process it is always a good to
- check the basics first.</p>
- <h3>What went right</h3>
- <p>I actually ended up learning a lot during the development of the
- (never finished) tool. I had never used <code>getopts</code> inside a
- script before, which turned out to be extremely intuitive. That was all
- that went right...</p>
- <h3>What went wrong</h3>
- <p>Literally, everything else that could&#39;ve went wrong did. The
- &quot;project&quot; was a single bash script roughly 160 lines long
- before I found out it wouldn&#39;t work. It was a series of flags that
- enabled actions that called functions, some of which ended the script
- either successfully or not. It wasn&#39;t necessarily a mess to read (I
- tried to make it that every function ended up in an exit so I knew if I
- entered I would need to assume it terminated) but it was hard to follow
- when writing. I tried to allow it so you could default an action to make
- the CLI intuitive which lead to a messy set of if/elses and switch
- cases.</p>
- <h4>You can&#39;t access un-committed bash history</h4>
- <p>History command in a bash shell commits the history at the end of the
- session. This makes sense once you know this, there are a lot of reasons
- saving the commands to file after every execution is probably not the
- best idea. However, it can be enabled with a flag when you enable a shell
- session. But I didn&#39;t want to build a tool that required me to
- remember I had to add something to my bash_profile before it would work.
- I wanted something I could just copy onto a new machine and have access
- to its functionality.</p>
- <h3>Lesson learned</h3>
- <p>While developing a tool to help me remember things, I learned
- something I cannot forget: Test the core, simplest functionality first.
- Before you do anything validate what you&#39;re trying to do will work.
- Because after building all of these fancy bells and whistles, if it
- can&#39;t do the basics, there is no point.</p>
- </article>
- ]]>
- </description>
- </item>
- <item>
- <title>Lisps, Assembly, C, and Conlangs</title>
- <link>https://www.senders.io/blog/2019-12-09/</link>
- <guid isPermaLink="true">https://www.senders.io/blog/2019-12-09/index.html</guid>
- <pubDate>Mon, 09 Dec 2019 00:00:00 -0500</pubDate>
- <description>
- <![CDATA[
- <article>
- <h2>Lisps, Assembly, C, and Conlangs</h2>
- <p>I had originally hoped to do more blogging as a way of practicing my
- writing and an incentive to do more hobby programming. The intent was
- never to make this site solely programming, I had actually a few scrapped
- posts about baking and guitar that just didn&#39;t get anywhere... but
- that being said I did have a fair amount of hobbying in 2019 that I can
- share some unfiltered, semi-structured thoughts on.</p>
- <h3>Racket, 80x86, and even more C</h3>
- <h4>Racket</h4>
- <p><a target="_blank"
- href="https://racket-lang.org">Racket</a> is a general-purpose
- lisp-like language. I had began messing around in it with the
- intention of creating a similar language to <a target="_blank"
- href="https://docs.racket-lang.org/scribble/">Scribble</a> a document
- authoring language written in Racket. I made <a target="_blank"
- href="https://xkcd.com/1205/">the classic mistake</a> of trying to
- create a productivity tool rather than just do the task I had
- originally intended to do. It was interesting messing around in a
- lisp/functional language which I haven&#39;t really used in a long
- time. I wish I had more insightful things to say about it or project
- to share. Either way its very worth the look.</p>
- <h4>6502 -&gt; 80x86 -&gt; Commander X16</h4>
- <p>I wanted to play around with writing some assembly language programs.
- I looked back at the NES tutorials and tried writing some basic
- hello-world programs for it, but never really came out with anything
- worth while. I booted up dosbox and tried experimenting in some DOS
- programming to get a kick of nostalgia. On my way over to a friends
- apartment I stumbled across an 80x86 reference book which I took home and
- dug into. I made some decent progress in, relative to my 6502 learning.
- But this was in the summer, and I was preparing for what would turn into
- a pretty time consuming move. After my move, my puppy, and some youtube,
- <a target="_blank"
- href="http://www.the8bitguy.com">The 8-Bit Guy</a> made a video about
- his 8 Bit computer project <a target="_blank"
- href="http://www.commanderx16.com/X16/Ready.html">Commander X16</a>
- which I started looking into. Like all the other assembly language
- projects they never amounted to more than a few print statements or
- colors on the screen. But X16 is something I am going to keep an eye
- on in 2020.<br>
- <a target="_blank"
- href="https://eater.net/">Ben Eater</a> also started a <a target=
- "_blank"
- href="https://eater.net/6502">6502 video series</a> which was amazing,
- and thankfully my learnings from earlier in the year made the content
- very understandable. In summary, I spent a lot of 2019 reading and
- watching a lot of content about assembly language programming, but
- never really did anything with it.</p>
- <h4>Never ending C</h4>
- <p>Without much to really say on the topic, I kept writing small programs
- in C throughout the year. I spent a lot of time debugging and
- troubleshooting a prefix terminal calculator with the intention of making
- it a full utility to use on the command line / from within scripts. You
- could do simple math without opening up x-calc, which I find myself doing
- to check some quick math. Example code: <code class="inline">calc &quot;+
- 1 1&quot;</code>. To me this was far cleaner than writing: <code class=
- 'inline'>echo $((1+1))</code>. The big ideas I had for it was adding a
- REPL and making it a command line calculator tool where you could get the
- features of a standard calculator with store and recall functions. This
- project involved making two stacks: the operations and the numbers.
- Implementing two stacks from scratch was interesting and I may upload the
- source and link it in an update. Overall it was full of breaks, bugs,
- wrong turns, and bizarre memory issues. So needless to say it was a fun 3
- days of programming.</p>
- <h3>Non Programming Writing</h3>
- <p>The project that soaked up a majority of my writing time, which sadly
- should&#39;ve been documented here, was my conlang / world-building
- project &quot;Tyur&quot;. This project spawned out of sci-fi story ideas
- that, of course, never went anywhere (due to my poor dialog writing, and
- writing in general) and my interest in language history. I have been
- reading <a target="_blank"
- href=
- "https://www.goodreads.com/book/show/1831667.The_Horse_the_Wheel_and_Language">
- The Horse the Wheel and Language</a> by David W. Anthony, which goes into
- the history around Proto-Indo-European. It can be a bit dense so I had
- been reading it on and off, and during the off times also started
- <a target="_blank"
- href=
- "https://www.goodreads.com/book/show/18635317-the-origins-of-language">The
- Origins of Language: A Slim Guide</a> by James R. Hurford, which tries
- to provide insights on the evolutionary concept of language. Both of
- these provided some fodder for the idea of creating my own <a target=
- "_blank"
- href="https://en.wikipedia.org/wiki/Constructed_language">conlang</a>.
- My conlang is &quot;Tyur&quot; the language spoken by the Tyur people.
- This process has really been a mix of world-building around the Tyur
- and some fun fantasy mini story ideas similar to The Lord of the Rings
- and old Warhammer Fantasy worlds. This however began my adventure down
- the rabbit hole of trying to figure out how to create a font so I can
- write more here about it. The documentation on this conlang is a mix
- of loose-leaf folded in my bag that I scribble on when I get an idea.
- So figuring out a proper way of building the alphabet and some root
- words to start a dictionary are my current goals for the remainder of
- the year/ start of 2020.</p>
- <h3>Closing</h3>
- <p>In closing, I think despite not writing much here, I messed around
- with some interesting languages this year, and hope I can hobby more in
- 2020.</p>
- </article>
- ]]>
- </description>
- </item>
- <item>
- <title>Venturing back into C</title>
- <link>https://www.senders.io/blog/2019-02-17/</link>
- <guid isPermaLink="true">https://www.senders.io/blog/2019-02-17/index.html</guid>
- <pubDate>Sun, 17 Feb 2019 00:00:00 -0500</pubDate>
- <description>
- <![CDATA[
- <article>
- <h2>Venturing back into C</h2>
- <p>For the past two weeks or so I have been diving back into C
- programming. I&#39;ve found it to be a very fun and refreshing experience
- coming off of a slog of Java 11 updates at work. I&#39;ve found comfort
- in its simplicity and frustrations in my &quot;I can do this without an
- IDE&quot; mindset.</p>
- <p>I started C programming in College during a 8 AM course of which all I
- can remember is that it was at 8 AM. I loved programming in C, dealing
- with memory, pointers, no strings, structs, no strings, linking, no
- strings. It was a really interesting difference from the web and Java
- programming I had done previously. Obviously the lack of the
- &quot;string&quot; type made things interesting and initially a challenge
- for me back then. In my most recent endevour I found <code class=
- 'inline'>char *</code> to be perfectly suitable for every case I came
- across. It was usually a separate library that was failing me, not a
- fixed char array. This was mostly due to the types of programs I was
- writting in college were text adventures where all of what I did was
- using strings. And my lack of understanding of what was actually
- happening in C was really what was causing all the issues.</p>
- <h3>The Project</h3>
- <p>I started working on an application I had been meaning to develop
- called <a href=
- 'https://github.com/s3nd3r5/reminder'><b>reminder.d</b></a>. This daemon
- would monitor for reminder notifications I would send via a CLI. It queue
- them up based on some time set to send the notification. I ended up
- writing both the CLI and the daemon in this past week, both in C.</p>
- <h4>The Beginning</h4>
- <p>This project started with an outline (as a README) which I think was
- the reason this ended up as an actually successful project. I had been
- thinking about this for a long time, and had begun using a calendar to
- keep track of long term reminders/dates etc. First, I outlined the
- architecture &quot;how would I actually do want to send myself
- remidners&quot;. Since half my day is spent infront of a computer, with a
- terminal open or at least two keystrokes away, a CLI would do the trick.
- Then how do I actually send myself notifications... writing them down. So
- I can use the CLI to write to a file and have a daemon pick up the
- changes and notify me once it hits the desired time posted.</p>
- <h4>The CLI</h4>
- <p>The CLI <b>remindme</b> took in messages and appened them to a file.
- This file would be monitored by the daemon later on. Each reminder
- consisted of three parts:</p>
- <ul>
- <li><i>Message</i> - The body of the notification.</li>
- <li><i>Time</i> - This is either a datetime or a period for when the
- notification should send.</li>
- <li><i>Flag</i> - The Flag was set by the CLI when written to the file,
- this marks the status of the reminder</li>
- </ul>After a notification is written the daemon will pick up the
- notification and notify if the time set is now/past.
- <h4>The Daemon</h4>
- <p>The Daemon <b>reminder-daemon</b> opened and tailed a file at
- <i>/usr/local/etc/reminder.d/$USER.list</i>. It would tail the file
- monitoring any incoming lines parsing them into reminders. The syntax of
- the reminder is <code class='inline'>FLAG EPOCHSEC MESSAGE</code> .
- Tokenizing on spaces it was then added to a linked-list sorted by time.
- Every second it checks the file for any new lines, adding reminders as
- they come in, then check the head of the list. If the reminder at the
- head is ready to be notified the daemon pops it off the list and sends
- the notification. After a notification is sent successfully the daemon
- modifies that line in file updating its <code class='inline'>FLAG</code>
- to &#39;d&#39;. This is so when the daemon starts back up it skips the
- reminder. Notifications are sent via <i>libnotify</i>: <code class=
- 'inline'>Reminder - $DATETIME</code> with the message body. They are also
- set to last until dismissed manually, this way if were to walk away, once
- I sat down I&#39;d see the stale reminder waiting.</p>
- <h4>Future Plans for Reminder.d</h4>
- <p>Having a system to create and send myself notifications is incredibly
- useful but having them limit to just the computer I sent them on makes
- them a very limited. I have been using them at work for the last few days
- and its nice to be able to tell myself to remeber to email a person after
- lunch. But I would like to be able to tell myself things later in the
- day. I have planned since the beginning to have a remote server I can
- sync the reminders through. In addition having an application running on
- my phone that also gets and sets reminders.</p>
- <p>Remote syncing would change entirely how I deal with reminders in the
- file.</p>
- <pre>
-<code>
- struct remnode {
- long fileptr;
- struct reminder* reminder;
- struct remnode* next;
- };
- </code></pre>
- <p>Is currently the struct I use to keep track of the reminders.
- <code class='inline'>fileptr</code> is the line of the file where the
- reminder is, so I can <code class='inline'>fseek</code> back to the
- location and overwrite its flag. I cannot currently think of a way to
- keep the files perfectly identical without introducing countless
- edgecases. What I do think might work is providing some form of UUID.
- When a remote pull tells the systems daemon that a notification has been
- cleared it can mark it by ID. Right now the fileptr is effectively its
- ID, but that will not work anymore. A composite key of the daemons own id
- (generated at install?) with a new ID of each incoming message would help
- ensure uniqueness across ID generations across multiple systems.</p>
- <h3>What I&#39;ve learned</h3>
- <p>First off, I probably could&#39;ve done this in bash. With
- <code class='inline'>date notify-send git awk cron</code> and a few other
- useful commands I could very easily keep track of file changes and push
- notifications at a certain time. But seeing as I scrap together bash
- scripts all the time I though C would make things more fun.</p>
- <p>Writing manpages was the probably the most fun I had working on the
- project. They have a simple elegance to them, similar to C. That being
- said you could FEEL the age of the language. Every single decision is
- there to make things simple to parse. Even compared to modern markup the
- explicit direct nature of the language made it so easy to learn. Every
- tag served a specific purpose and each objective I had had a flag to do
- it.</p>
- <pre><code>
-.TH REMINDME 1
-.SH NAME
- remindme \- Send yourself reminders at a specific time on one or more devices
-.SH SYNOPSIS
-.B remindme
-[\fB\-t\fR \fITIME\fR]
-[\fB\-\-at \fITIME\fR]
-[\fB\-i\fR \fIPERIOD\fR]
-[\fB\-\-in\fR \fIPERIOD\fR]
- </code>
- </pre>
- <p>Libnotify was insanely easy to work with, from a programming
- perspective.</p>
- <pre><code>
- NotifyNotification *notif = notify_notification_new(title, rem-&gt;message, &quot;info&quot;);
- notify_notification_set_app_name(notif, APP_NAME);
- notify_notification_set_timeout(notif, NOTIFY_EXPIRES_NEVER);
-
- GError* error = NULL;
- gboolean shown = notify_notification_show(notif, &amp;error);
- </code>
- </pre>
- <h3>In closing</h3>
- <p>Overall, this was an extremely fun first week of engineering. I look
- forward to what I am able to do syncing and sending notifications on
- android.</p>
- <p>For the zero people reading, grab a beer and outline your project.
- Full through. Think about the how, then write it down. Don&#39;t worry
- about getting in the weeds of how to write a manfile, thats what is fun
- about programming. I thought I botched my debian/sid environment
- uninstalling and reinstalling a notification daemon. Infact I think its
- caused me to take a stance on the whole systemd thing. Either way, start
- a private repo (they&#39;re free now) write a README and a LICENSE file
- and iterate on the README until you realize &quot;oh shit this is
- something I can do&quot;. Then do it. This project still needs some work,
- but for an MVP, its actually done. And now I can dive in the deep end of
- trying to actually make it easy to setup on a fresh PC. Or dive into
- modern android development and server syncing...</p>
- </article>
- ]]>
- </description>
- </item>
- <item>
- <title>First! A New Years Resolution</title>
- <link>https://www.senders.io/blog/2019-01-21/</link>
- <guid isPermaLink="true">https://www.senders.io/blog/2019-01-21/index.html</guid>
- <pubDate>Mon, 21 Jan 2019 00:00:00 -0500</pubDate>
- <description>
- <![CDATA[
- <article>
- <h2>First! A New Years Resolution</h2>
- <p>I like to write small hacky things from time to time when I have a
- weekend to myself, or a day, or an hour... But I never had a place to put
- them or the push to complete them beyond their initial hack. So I decided
- I should write a blog about it.</p>
- <p>Also for work I had to write some prose about myself, something beyond
- a technical document or RFC and I realized I am shit at writing my
- thoughts outside of a very direct specific technical way.</p>
- <p>I am not sure if it is the age of the internet I grew up in where most
- of my written communication was informal or for school. But my personal
- writing skills are trash and this is my attempt to kill all the birds
- with one stone</p>
- <h3>What can be expected here</h3>
- <p>My intentions for this site beyond just a landing page with my resume,
- I hope to upload some code-snippets from things I found interesting,
- ideally some recordings, drawings, and model-painting.</p>
- <h3>How often do I intend to update this blog</h3>
- <p>Ideally, whenever I have something that I feel is worth sharing. But
- for the sake of my resolution I want to do at least one post a month, and
- if I am keeping my other resolutions I should have content to put
- here</p>
- <h3>Designing my site</h3>
- <p>Designing this blog actually took way more time than it should have.
- It began when I wanted to tackle a <i>javascriptless</i> website. And I
- found that a bit difficult if I wanted to have code with syntax
- highlighting. So I wrote a python script to generate <code class=
- 'inline'>&lt;pre&gt;</code> tag wrapping Java code with partial syntax
- highlighting.Possibly mistaking <code class='inline'>highlight.js</code>
- usage documentation. But I would like to prevent having javascript on my
- main website keeping it as simplistic as possible.</p>
- <p>I test the site using both <code class='inline'>tidy</code> and
- <code class='inline'>nginx</code> via <code class='inline'>docker</code>.
- Using tidy I can validate the html (making sure I didn&#39;t miss any
- tags etc) and tidy up any odd spacing. And then visually test it running
- nginx. Having it served up similarly to s3 all the paths will work, and
- is insanely easy to setup! If you&#39;re reading this and have anything
- beyond a simple html file I recommend running docker + nginx over any
- javascript server.</p>
- <p>Then I deploy the site through <code class='inline'>s3-cli</code>
- Which is simple and to the point.</p>
- <h3>In Closing</h3>
- <p>I wanted to include more but I ran out of time today to write more, I
- will probably update this article with more information (and an updated
- timestamp). Or just make another post of my code highlighting task.</p>
- </article>
- ]]>
- </description>
- </item>
-</channel>
-</rss>