summaryrefslogtreecommitdiff
path: root/st.c
AgeCommit message (Collapse)Author
2014-04-28Simplify expressions in tputc()Roberto E. Vargas Caballero
2014-04-28Fix misplaced breakRoberto E. Vargas Caballero
This misplaced break was causing an incorrect fall through from DSR to DECSTBM.
2014-04-28Create a function for DEC testRoberto E. Vargas Caballero
Almost of the sequences execute their action in a separate function, which is good because helps to read the full set of sequences faster.
2014-04-28Fix tputc control code handlingRoberto E. Vargas Caballero
The patch 53105cf modified how control codes were detected, because it tried to handle also C1 control codes (0x80-0x9f), that have upper bit to 1, so they are multi byte character in utf8. Code was checking the value of width in order to known that after decoding the unicode point had a width of 1 byte, but it as incorrect because this width is the columnb width.
2014-04-27Remove repeated initialisation of term.escRoberto E. Vargas Caballero
Once a sequence is completed term.esc must return to 0, so instead of repeating this expression in all the cases is better put it at the end of the block.
2014-04-27Cancel DCS with SUB, CAN, ESC or any CC1 codeRoberto E. Vargas Caballero
From http://www.vt100.net/docs/vt510-rm/chapter4: *The VT510 ignores all following characters until it receives a SUB, ST, or any other C1 control character. So OSC, PM and APC sequence ends with a SUB (it cancels the sequence and show a question mark as error), ST or any another C1 (8 bits) code, or their C0 (7 bits) equivalent sequences (at this moment we do not handle C1 codes, but we should). But it is also said that: Cancel CAN 1/8 Immediately cancels an escape sequence, control sequence, or device control string in progress. In this case, the VT510 does not display any error character. Escape ESC 1/11 Introduces an escape sequence. ESC also cancels any escape sequence, control sequence, or device control string in progress.
2014-04-27add break;s for last cases in switch statementsMarkus Teich
2014-04-26Do not eat ESC character if control string is not properly terminated.noname
Currently tputc handles the case of too long control string waiting for the end of control string. Another case is when there is ESC character is encountered but is not followed by '\\'. In this case st stops processing control string, but ESC character is ignored. After this patch st processes ESC characters in control strings properly. Test case: printf '\e]0;abc\e[1mBOLD\e[0m' Also ^[\ is actually processed in the code that handles ST. According to ECMA-048 ST stands for STRING TERMINATOR and is used to close control strings.
2014-04-26Fix for multibyte characters in techo.noname
Works for both signed and unsigned char.
2014-04-26s/DSC/DCS/ DCS stands for DEVICE CONTROL STRINGnoname
2014-04-26Use xwrite instead of write.noname
2014-04-26Remove unnecessary breaknoname
2014-04-25Comment fix.noname
2014-04-25On terminal resize, clear the alt screen with its own cursor.Colona
Currently the alternate screen get messed up on resize if it has different colors or mode.
2014-04-25Optimize tputtab.noname
Before this patch executing printf '\e[10000000000I' or printf '\e[10000000000Z' resulted in long delay.
2014-04-25Use != instead of ^ for logical values.noname
sel.alt is only changed by sel.alt = IS_SET(MODE_ALTSCREEN);
2014-04-25Use BETWEEN macro in xsetcolorname and fix style.noname
2014-04-25Conformity in the -g geometry handling.Christoph Lohmann
Thanks to Yuri Karaban for suggesting this! These changes make -g correspond to <cols>x<rows> and honor it so non-tiling window managers can work with the size hints afterwards. It also adds a -i flag to force the window size. This is needed so -g keeps being useful in dwm.
2014-04-25Simplify a bit more tdeletechar and tinsertblankRoberto E. Vargas Caballero
The large and repeated expression used in memmove to indirect the line can be simplified using a pointer, that makes more clear where begins and where ends the movement.
2014-04-25Simplify tdeletechar and tinsertblank and fix memory corruption.noname
Current CSI parsing code uses strtol to parse arguments and allows them to be negative. Negative argument is not properly handled in tdeletechar and tinsertblank and results in memory corruption in memmove. Reproduce with printf '\e[-500@' Patch also removes special handling for corner case and simplifies the code. Removed term.dirty[term.c.y] = 1 because tclearregion sets dirty flag.
2014-04-23Style fixes in tscrollup.noname
2014-04-23Do not set dirty flag twice in tscrollup and tscrolldown.noname
2014-04-23Use tsetdirt in tscrollup and tscrolldown.noname
tscrollup and tscrolldown do not use tsetdirt, but their code is equivalent to tsetdirt(orig, term.bot-n); tsetdirt(orig+n, term.bot); tclearregion also marks cleared lines as dirty. In tscrolldown it sets lines from term.bot-n+1 to term.bot dirty, and in tscrollup it sets lines from orig to orig+n-1 dirty. In both functions all lines from orig to term.bot are effectively set dirty, but in tscrolldown lines from orig+n to term.bot are set dirty twice, and in tscrollup lines from orig to term.bot-n are set dirty twice. These patches make it clear which lines are set dirty and sets them dirty once in each funciton.
2014-04-23Fix techo handling of control and multibyte characters.noname
techo compares signed char to '\x20'. Any character with code less then '\x20' is treated as control character. This way characters with MSB set to 1 are considered control characters too. Also this patch makes techo display DEL character as ^?. To reprocuce the bug, enable echo mode using printf '\e[12l', then type DEL character or any non-ASCII character.
2014-04-23Make xrealloc and xstrdup style consistent.noname
2014-04-23Use BETWEEN in tsetchar.noname
2014-04-23Use uint and uchar instead of unsigned int and unsigned char.noname
2014-04-23Remove argument names from function prototypes.noname
2014-04-23Style fix in tdumpsel.noname
2014-04-23Use BETWEEN in tinsertblankline and tdeleteline.noname
2014-04-22It's 2014 now.Christoph Lohmann
2014-04-20move MODBIT to Macros sectionnoname@inventati.org
Patch moves MODBIT to macros section and uses it in tselcs.
2014-04-20misplaced parenthesis in LEN macrononame@inventati.org
2014-04-20remove confusing SERRNO macroMarkus Teich
I found the SERRNO Macro slightly confusing, since you have to look it up, if you don't know it already. A web search showed it does not seem to be any kind of standard. Also there was no reason in the commit log when it was introduced in 2009. As you can see it also leads to new patches, which don't use this macro (probably the author did not know about it).
2014-04-15Simplify techononame@inventati.org
Remove special case for \e because it is handled well by "control code" case.
2014-04-15typedefs instead of #definesnoname@inventati.org
Replaced #defines with typedefs where possible, patch attached.
2014-04-15fix cursor handling when alt screen is disabledq@c9x.me
I don't like this alt screen thing, but when allowaltscreen == 0, the cursor is still saved and restored after calling 'less' (or 'man'). This patch makes allowaltscreen == 0 usable.
2014-04-15Merge remote-tracking branch 'origin/master' into omasterRoberto E. Vargas Caballero
2014-04-11Removing two unnecessary gettimeofday().Christoph Lohmann
2014-04-11Increment XSync consistencyToaster Toaster
This patch cleans up a style inconsistency.
2014-04-05There is no need for a full dirt redraw.Christoph Lohmann
2014-04-02Fixing a compiler warning with the assignment.Christoph Lohmann
2014-03-27Fix segfault when pressing PrintScr without a selectionRafa Garcia Gallego
2014-03-27new utf decoderDamian Okrasa
This patch replaces current utf decoder with a new one, which is ~50 lines shorter and should be easier to understand. Parsing 5 and 6 sequences, if necessary, requires trivial modification of UTF_SIZ constant and utfbyte, utfmask, utfmin, utfmax arrays.
2014-03-10Merge branch 'master' of ssh://suckless.org/gitrepos/stRoberto E. Vargas Caballero
2014-03-06Add sequence for printing the current selectionRoberto E. Vargas Caballero
This is very usefull in order to can select what is sent to the plumber.
2014-03-06Add key definition for printer sequencesRoberto E. Vargas Caballero
These new combinations generate the same behaviour (basically) of vt102. It is a good way of communicating st with other programs. [0] http://www.vt100.net/docs/vt102-ug/chapter2.html
2014-03-06Add MC for the full screenRoberto E. Vargas Caballero
This sequence is very useful because allows comunicate the content of the terminal to another program.
2014-03-06Add MC for a single lineRoberto E. Vargas Caballero
This sequence print the current line. It is different to the 'printer on' sequence, where all the characters that arrive to the terminal are printer. Here only the ascii characters are printed.
2014-03-01Style cleanup.Christoph Lohmann
Add some note about the main reason why st is still that big.