summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-04-13Implement most ICCCM rules for selection handling.Markus Wichmann
ICCCM mandates the use of real timestamps to interact with the selection, to rule out race conditions if the clients are run at different speeds. I have implemented the low hanging fruit, putting the timestamps into text selection. Also, ICCCM mandates a check for whether XSetSelectionOwner() worked. Not sure my version is correct, though.
2015-04-13Merge branch 'master' of ssh://suckless.org/gitrepos/stRoberto E. Vargas Caballero
2015-04-13Do not use tmoveto in tputtab.noname@inventati.org
tmoveto resets CURSOR_WRAPNEXT. Simple testcase: for i in $(seq 1 200); do printf '\t.'; usleep 100000; printf '\t@'; usleep 100000; done In st executing this script causes @ and . to overwrite each other in the last column.
2015-04-10Make DECSCUSR thickness configurableOmar Sandoval
2015-04-10Use MAX macro where possible.noname
2015-04-10Remove 'xloadfontset' function.noname
It was used only once and its return value was ignored.
2015-04-10Remove keywords from function definitions.noname
2015-04-10Remove variable names from function declarations.noname
2015-04-06Remove redundant control checkRoberto E. Vargas Caballero
control was set, but it was not ever used because it was set again some lines later.
2015-04-06Fixed STR sequence termination conditionnoname
ascii code may only be checked for characters that have length equal to 1, not width equal to 1
2015-03-20Remove strsep() callRoberto E. Vargas Caballero
strsep() is not a POSIX function, and it means that every system needs different defines to expose it. If the prototype of strsep is not exposed then an ugly int/pointer is done and it might mean a crash. The best solution?, to remove the strsep and make a custom loop. If C programmers cannot do this kind of loops without calling a library function, then maybe we should move all the suckless software to Java.
2015-03-19Merge remote-tracking branch 'origin/master'Roberto E. Vargas Caballero
2015-03-19Support the DECSCUSR CSI escape sequenceLemonBoy
2015-03-16arg.h wasn't used for dist.Christoph Lohmann
2015-03-16Handle pasting of empty selection.Alex Pilon
Otherwise, pasting the X11 primary selection when empty results an error and Xlib forcibly exits. Signed-off-by: Christoph Lohmann <20h@r-36.net>
2015-03-15Support XA_STRING in notify requestRoberto E. Vargas Caballero
Some programs can only deal with XA_STRING, and it makes impossible st be able of copying to them. This patch makes st answer also to XA_STRING, althought it sends utf8 strings. It is not a problem because moderm applications must support utf8.
2015-03-14TODO: Fix fontconfigChristoph Lohmann
2015-03-14Add the new selection shortcuts to the manpage.Christoph Lohmann
2015-03-14Glibc wants me to use _DEFAULT_SOURCe. I do obey.Christoph Lohmann
2015-03-14Add Mod + Shift + c/v and no selclear.Christoph Lohmann
Thanks to Alex Pilon <alp@alexpilon.ca>! Now there is a distinction between the primary and clipboard selection. With Mod + Shift + c/v the clipboard is handled. The old Insert behavious does reside.
2015-03-13Allow combinations with BackspaceRoberto E. Vargas Caballero
XN_ANY_MOD makes that any combination of backspace will return always DEL. This patch lets to X to decide which value returns.
2015-03-11FAQ: fix wordingAlexander Huemer
2015-03-11Backspace value shouldn't depend on keypad stateIvan Delalande
2015-03-10Merge branch 'master' of ssh://suckless.org/gitrepos/stChristoph Lohmann
2015-03-10St now does only set PRIMARY on selection.Christoph Lohmann
http://standards.freedesktop.org/clipboards-spec/clipboards-latest.txt
2015-03-10FAQ: fix wordingAlexander Huemer
2015-03-10Fixing the C reading test.Christoph Lohmann
This was a test to see if anyone actually reads what is submitted. The list of people not contributing will be valuable in the future.
2015-03-10Change the FAQ for the new Backspace behaviour.Christoph Lohmann
2015-03-10Finally resolving the backspace problem.Christoph Lohmann
The majority now using the Linux behaviour. Minorities have to live in their ghettos.
2015-03-09Add a hack to handle unknown chars in fontconfig.Christoph Lohmann
The unicode long is added to the cache. So when fontconfig does fall back to the default font (where there is no easy way to find this out from the pattern) it isn't reloaded.
2015-03-07Update kdch1 definition to three octal digits.Johannes Postma
ncurses wasn't able to detect the delete-character key as KEY_DC. This patch fixes that. kdch1 was defined as "\0177", but terminfo(5) states: ... characters may be given as three octal digits after a \. The delete-character key is correctly defined in config.def.h.
2015-02-28Small improvements to the FAQRoberto E. Vargas Caballero
2015-02-23document keys in man pageGreg Reagle
2015-02-22Let curses do the dirty work for flashIvan Delalande
Use the terminfo delay syntax ($<x>) in our flash capability to avoid hardcoding a fixed delay in redraw() when called from tsetmode() with DECSCNM. We need to turn on the npc capability so that delays are made with xon/xoff instead of padding characters.
2015-02-22Comment default CC assignmentRoberto E. Vargas Caballero
CC by default is cc, so the assignment was doing nothing, but it was using non standard syntax, so some system (NetBSD) fail to compile.
2015-02-22Update dates in LICENSERoberto E. Vargas Caballero
2015-02-15Update year in usage()Nils Reuße
2015-02-15Fix crash on font resize resizeNils Reuße
if you keep downsizing your fontsize until either xw.ch or xw.cw gets 0, st crashes, because there is an unchecked division in cresize.
2015-02-05Correct shift amount on MODE_INSERT in tputc()Rian Hunter
When MODE_INSERT is set we'd shift characters on the same line forward before inserting our character in tputc(). This did not account for wide characters where width != 1. This patch makes it so we shift the correct amount.
2015-02-05Fix crash due to wide charactersRian Hunter
In tputc(), when a character wasn't large enough to fit on the current line, we would call tnewline() to place it on the next line. Unfortunately, we weren't resetting our glyph pointer and this caused memory corruption when a wide character (width == 2) was being written. This patch resets our glyph pointer after calls to tnewline().
2014-12-23Fix crash due to invalid timespec given to pselectIvan Delalande
If blinktimeout is set to a value greater than 1000, pselect will receive a timeout argument with tv_nsec greater than 1E9 (1 sec), and fail, making st crash. This patch just ensures that the timespec structure is correctly filled with a value properly decomposed between tv_sec and tv_nsec. Reported by JasonWoof on IRC. Thanks!
2014-11-19Trim trailing whitespaces in every selection caseIvan Delalande
Trailing whitespaces are trimmed when copying from normal selection and rectangular selection on lines that have their last character included or on the left of the selection. It leads to inconsistent behaviors when copying the exact same text from the left and right window in applications with vertical splits. This patch solves this issue by always trimming the selection.
2014-11-19Call _exit() instead of exit() if exec*() failssin
exit() will also unwind the atexit() functions. This is bad because if exec*() fails the process is in an inconsistent state.
2014-11-11Check for presence of SHELL environment variableEric Pruitt
- POSIX states the SHELL environment variable "... shall represent a pathname of the user's preferred command language interpreter." As such, st should check for its presence when deciding what shell to use; just as HOME can be defined to override one's passwd-defined home directory, a user should also be able to override their passwd-defined shell using the SHELL environment variable.
2014-11-03Replace character with U+FFFD if wcwidth() is -1czarkoff@gmail.com
Helpful when new Unicode codepoints are not recognized by libc.
2014-10-21Avoid failing when embedding with a Window id of 0Quentin Rameau
I'd like to let st run with its own window when trying to embed it to a window with id 0 instead of exiting with an error.
2014-10-21Reverting smacs and rmacs to the xterm defaults.Christoph Lohmann
These are needed by ncurses to correctly handle the switch between line drawing. The changes to the alternative characterset code already fixed the urwid hack.
2014-10-15Do not set SHELL to utmp everRoberto E. Vargas Caballero
SHELL must be set to the SHELL of the user, but it was possible set it to utmp.
2014-10-13patch for bell in stCustaiCo
The XBell() call currently used when a bell is recieved sends a message to the X server, but if the X server doesn't know how to sound it, it just gets ignored and I have not been able to find anywhere in x.org's code a way to configure the action that the server does. However, if you use XkbBell() then you can have a process listening for the XkbBellNotifyEvent that is produced and either alert you visually or play an audio file or whatever you want as your notification. You have to include one more header file but the function seems to be compiled as part of Xlib, at least on my installation. CustaiCo
2014-10-08Use G1 for alternate charsetRoberto E. Vargas Caballero
St has enacs, which must be printed if a program requires to use the alternate charset (graphic charset), that in st case was to select charset graphic for G1, but it was not useful at all because smacs and rmacs were always redefining the value of G0.